Examples of 'check connections' in a sentence
Meaning of "check connections"
When someone is asked to check connections, it typically means to verify or ensure that the physical or logical links between different components or devices are properly established and functioning correctly. This phrase is commonly used in the context of troubleshooting or setting up various systems, networks, or electronic devices, where ensuring the proper functioning of connections is crucial
How to use "check connections" in a sentence
Basic
Advanced
check connections
Check connections or change to another electrical outlet.
Reconnect regulator and leak check connections.
Check connections to all speakers in the system.
Turn off and check connections.
Check connections to speakers and other equipment.
Unplug charger and check connections as described above.
Check connections of motor temperature measurement circuit.
Clean thermocouple and check connections.
Check connections and repair wiring as necessary.
Purge system and check connections.
Check connections and screws and tighten if necessary.
Quickly check connections.
Check connections for an auxiliary source.
Try another power outlet and check connections to charger and concentrator.
Check connections to make sure they do not leak.
See also
Remove rear compartment access cover and check connections on the water valve.
Check connections regularly during use.
Interrupted coil Check connections or replace coil.
Check connections with the monitoring system again.
Incorrect or loose power cable connection Check connections.
Check connections and mounting screws as stated above.
Wrong or loose power cable connection Check connections.
Check connections and function of the main amplifier.
No sound Turn unit off and check connections.
Check connections and check course computer is switched on.
Bad component in the signal chain Check connections.
Check connections for air bubbles.
Source unit is not grounded properly Check connections and repair wiring as necessary.
Check connections and continuity of the brake winding.
Once again choose the MIDI menu command Check Connections to end the test.
Check connections from receiver or preamplifier.
Bad contact Connections to terminals interchanged Check connections Tighten electronics.
Always check connections before using.
Remove device and / or speaker and check connections.
Check connections to the terminal board.
After unplugging unit, check connections at battery.
Check connections and prices here.
After unplugging unit, check connections.
Check connections to both the speakers and the receiver.
If the operation is not as described here, check connections and cabling.
Check connections and shortages between pump and controller.
Let us have composite portraits of those two, and check connections.
Check connections and cables to make sure they are working.
If sound is not output normally, immediately turn power off and check connections.
Check connections of output cables and settings on amplifier or mixing console.
Bad connection in pump circuit - Check connections.
Periodically check connections for any sign of fatigue for failure.
Loose connection in fan circuit - Check connections.
Check connections and the battery if the buzzer does not activate.
Connection cable has become detached > Check connections between the devices.
You'll also be interested in:
Examples of using Connections
Show more
It shares no electrical connections with the thermostat
Media connections and interfaces are freely accessible
Make sure all the connections have been
Examples of using Check
Show more
I am gonna check on the condition of the survivors
Search for the sensor or check batteries
I will go check on the undercover butter agenda
