Examples of 'check correct' in a sentence
Meaning of "check correct"
check correct - This phrase is used when verifying if something is accurate or precise. It is commonly used in situations where approval or validation is required. For instance, 'Please check if the calculations are correct before submitting the report.'
How to use "check correct" in a sentence
Basic
Advanced
check correct
Test to check correct pin probe insertion.
Test in the engines of these structures to check correct operation.
Check correct prefilling of the expansion tank.
Press a few keys to check correct response.
Check correct mounting by pulling on the CabrioFix.
Ignite burners and check correct operation.
Check correct mounting by pulling on the EasyBase.
Inspection is essential to check correct system installation.
Check correct dosage by pressing button.
Tap microphone to check correct functionality.
Check correct setting of heater control.
Before connection check correct polarity.
Check correct setting of the reticle by test shooting.
Adjust the thermostat or check correct operation of the heating element.
Check correct working of limit stop.
See also
Take the rudder and check correct fitting into the pocket.
Check correct voltage is present on all input lines.
This information can be used to check correct operation of the malfunction indicator light.
Check correct welding program selected.
Fill the condensate trap and check correct connection of the condensate elimination system.
Check correct operation of the gaskets.
Loss of a motor phase Check correct voltage is present on all motor leads.
Check correct functioning of the chainsaw before commencing work.
Before the training, always check correct installation and.
Double check correct placement of utilities.
If the connected motor does not emit any signals, check correct wiring.
You can check correct answers after practice.
Once mounted the burner, the installer must check correct closing and sealing of door.
Check correct use of brakes.
Switch on individual lights, check correct operation of electrical system.
Check correct ohmic value in the probe with multimeter.
In particular, it is relatively difficult to check correct operation and / or settings of these detectors.
Check correct sending intervals for some of known programs.
Note, Secretariat to check correct names and numbers of conventions.
Check correct operation of power tool and insert plug properly.
Note, A simple check for oil spray is therefore not sufficient to check correct lubrication.
Regularly check correct fitting of input and output connections.
Rotor bearing worn / failed Poor lubrication Check correct oil type and oil level.
Check correct direction of rotating and balance of knives after sharpening.
No trip distance reading alignment Check correct transmitter / magnet Check battery and correct installation.
Check correct channel number selected on wire feeder control panel.
See the actions indicated in E92 Check correct operation of the condensate drainage.
Check correct connection of the electrical system and efficiency of the earthing system.
Before starting operation check correct adjustment and functionality of the band saw guards.
Check correct lighting of the water heater by turning it on and off several times.
Fan fault Check correct operation of the fan.
Check correct alignment of the side panel with the ceramic front panels.
Installation error Check correct fitting of the connecting cable to the control panel.
Check correct position for the assembly in detail drawing 4.
WARNING, Before use, check correct fastening of the car seat, by pulling it up strongly.
You'll also be interested in:
Examples of using Check
Show more
I am gonna check on the condition of the survivors
Search for the sensor or check batteries
I will go check on the undercover butter agenda
Examples of using Correct
Show more
The correct presser foot is not being used
Information for the correct disposal of electrical
Correct extraction under extraction over extraction
