Examples of 'choke knob' in a sentence
Meaning of "choke knob"
choke knob: A manual control device used to adjust the air-to-fuel ratio in an internal combustion engine
How to use "choke knob" in a sentence
Basic
Advanced
choke knob
The choke knob must engage in position.
Some models have a separate choke knob.
Push the choke knob inward halfway.
Pull out the choke knob.
Pull choke knob fully to choked position.
You sell me this choke knob.
Choke knob and drive clutch lever pivot.
If the engine stops while the choke knob in on g or during acceleration.
Choke knob was pulled and left in the position.
If the engine does not start Choke knob.
Turn the choke knob to the closed position.
When firing occur, push in the choke knob and pull.
The choke knob is used to open or close the choke.
When starting the engine, push the choke knob back.
Pull the choke knob when the engine is cold.
See also
After no more than five attempts, turn the choke knob to e.
Push the choke knob back to the original position.
Once the engine starts, slowly push the choke knob in.
Operation of the choke knob is not required if the engine is warm.
After the engine is warmed up, the operator pushes the choke knob back.
The choke knob controls the position of the engine choke.
If engine does not start easily, pull choke knob fully and return it.
The choke knob opens and closes the choke valve in the carburetor.
If the engine is cold, pull the choke knob out before starting the engine.
The choke knob is in the normal run position F.
When you hear the engine want to start, return choke knob to run position.
Pull out the choke knob located on the left side of the upper handle.
When the engine is running normally, press the choke knob back to its normal position.
N Set the choke knob according to engine temperature.
When restarting immediately after stopping hot engine, choke knob should be in the open position.
Pull the choke knob out to the CLOSED position.
To restart a warm engine, leave the choke knob in the OPEN position.
Pull the choke knob to the full CHOKE position.
When engine starts, move choke knob to.
Push the choke knob to the OPEN position as the engine warms up.
To start a cold engine, pull the choke knob out to the CLOSED position.
N Turn the choke knob to n and continue cranking until the engine runs.
Do you know how hard it is to find an original choke knob for a 19.
N Choke knob automatically returns to the run position F when the throttle trigger is operated.
Engine Flooded Set choke knob to open / run position.
Choke knob in the first-stage position choke open and throttle lever in the starting position.
Pull out the choke knob to the ( a ) position.
Choke Knob - Used when starting a cold engine.
If the engine is cold ( has not been started recently ) pull out the choke knob.
Put choke knob to No Choke position.
As the engine warms up, adjust the choke knob ( 14 ) toward the RUN position.
Return the choke knob to the original position after warming up the engine see page 39.
N Press in the outer edge ( arrows ) of the choke knob ( 5 ) and then turn it to g.
N Set the choke knob to e - even if the engine is cold.
Choke Knob - Used when starting a cold engine Pull / Push.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Choke
Show more
Do not choke the carburetor to stop engine
Line current with choke from catalogue
Choke your own self if you want
