Examples of 'choke lever' in a sentence
Meaning of "choke lever"
A choke lever is a mechanical or manual device used to control the air-fuel mixture in an internal combustion engine. It is typically found in carbureted engines and is used to adjust the amount of air entering the engine during starting or cold weather conditions
How to use "choke lever" in a sentence
Basic
Advanced
choke lever
Immediately set the choke lever to position.
Slide choke lever out to closed position.
Confirm that the choke lever is open.
Move choke lever to run position.
The speed is controlled by the choke lever.
Keep the choke lever full openĪ.
Then immediately pull the choke lever up.
Keep the choke lever full open.
On the right side was the choke lever.
Move the choke lever to the open position.
And pull the choke lever.
Move choke lever to closed position.
Close the engine choke lever.
Engage the choke lever with the throttle.
Then immediately move the choke lever down.
See also
Move choke lever to full choke.
Make sure that the choke lever is open.
Set choke lever to no choke position.
Close choke with choke lever.
Lift the choke lever to the closed position.
Incorrect position of the choke lever.
Slowly move choke lever to no choke.
Choke lever on the engine in the operating position.
Pull starter three times with choke lever at run.
Push choke lever in to start position.
Choke the engine by moving the choke lever up choke is closed.
Move the choke lever up to the full choke position.
Close the choke push the choke lever front ward.
Pull the choke lever out to its full extent.
If the starter handle is pulled repeatedly when the choke lever.
Move the choke lever fully to the left.
In the case the engine is hot do not use the choke lever.
The choke lever is used when starting the engine.
Close the choke by moving the choke lever to the up position.
Move the choke lever downward to open the choke.
If the engine does not start Choke lever.
Turn the choke lever back to the operating position.
Gradually push engine Choke lever to the right.
Open the choke lever progressively while checking the.
For hot engine starts make sure choke lever is in the choke position.
Choke lever set to the cold start position choke closed.
Be sure to open the choke lever to the full in the end.
The choke lever opens and closes the choke valve in the carburettor.
Move the blue engine choke lever to the closed position.
Flip choke lever to position and pull starter until engine starts.
Place the blue choke lever in Position.
The choke lever opens and closes the choke valve in the carburetor.
Make sure that the choke lever is in OPEN position.
Choke lever set to the warm start and working position choke open.
Never stop the engine by moving the choke lever into the CHOKE position.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Choke
Show more
Do not choke the carburetor to stop engine
Line current with choke from catalogue
Choke your own self if you want
