Examples of 'clamp handle' in a sentence
Meaning of "clamp handle"
clamp handle - A clamp handle is the part of a clamp that is used to tighten, release, or adjust the clamping mechanism
How to use "clamp handle" in a sentence
Basic
Advanced
clamp handle
Tighten the bevel clamp handle firmly.
Check that the saw arm does not move when the bevel clamp handle.
Tighten the table clamp handle and any.
Clamp handle Red arrow mark.
Adjusting the track arm clamp handle.
Push the sandpaper clamp handle down to lock the sandpaper in place.
Loosen the bevel clamp handle.
Release the bevel clamp handle and set the blade to the required angle.
Tighten the rotating table clamp handle 5.
Clamp handle door ( FISinter is information of producers ).
Set the temperature regulation clamp handle on the desired temperature regulation.
After selecting the desired mitre angle, be sure to tighten the mitre clamp handle 4.
Loosen the bevel clamp handle 19 and set the bevel as desired.
Holding the head, lock the bevel clamp handle securely.
Loosen the bevel clamp handle 19 and move the saw head to the left.
See also
To move the rip fence, loosen the clamp handle while.
Tighten the bevel clamp handle ( 24 ) and leave it in horizontal position.
To lock the yoke in position, pull the yoke clamp handle toward you.
Tighten the bevel clamp handle ( 21 ) and remove the drill bit.
After selecting the desired miter angle, be sure to tighten the miter clamp handle 4.
Secure the clamp handle ( a ) again.
To use the handle clamp, grasp the top handle and pull out the clamp handle.
Loosen the bevel clamp handle ( 11 ) and turn the vertical position.
Unscrew and remove the track-arm clamp handle assembly A.
Release the bevel clamp handle ( 24 ) and tilt the head to the angle.
Loosen the rotating table clamp handle 5.
Undo the clamp handle ( a ) and turn the cover ( 4 ) into the required position.
To adjust pointer 0 setting, loosen the clamp handle.
Loosen the bevel clamp handle ( 17 ) and move the saw arm to the left.
With the head in the vertical position and the bevel clamp handle 24.
Thread the table clamp handle ( g ) Fig . 8 in the hole in rear of table bracket.
Standing behind the machine, release the bevel clamp handle 24.
To clamp tissue, clamp handle 120 is pivoted downward in the direction of arrow “ A ” in FIG.
This spring 618 assists in articulated movement of clamp handle 602 between the closed and open positions.
To tilt the motor for bevel cutting, loosen the bevel clamp handle Fig . 33.
After adjusting, turn the bevel clamp handle ( F ) Fig . 44 counter-clockwise to lock the motor in position.
