Examples of 'clamp' in a sentence
Meaning of "clamp"
A clamp is a device used to hold things tightly together or to prevent something from moving
Show more definitions
- A brace, band, or clasp for strengthening or holding things together.
- An instrument used to temporarily shut off blood vessels, etc.
- A parking enforcement device used to immobilise a car until it can be towed or a fine is paid; a wheel clamp.
- A mass of bricks heaped up to be burned; or of ore for roasting, or of coal coking.
How to use "clamp" in a sentence
Basic
Advanced
clamp
Do not subject the clamp to running water.
You clamp the top of your throat.
Then tighten the clamp screw securely.
My clamp was on the stomach the entire time.
Mounts to handlebar clamp of other secure bolt.
Hose clamp just needs tightening a little.
Connect the earth clamp to the workpiece.
Now clamp off the blood supply.
Then tighten the clamp nut securely.
Metal clamp supplied with the unit.
Tighten the bevel clamp handle firmly.
Tighten clamp nuts to lock guard in position.
Disconnect the black negative clamp first.
Bolt or clamp the saw to its support.
Close the height adjust locking clamp.
See also
Close blade clamp release lever down.
Clamp tool to be sharpened securely in bench vise.
Where possible clamp the workpiece to a bench.
Clamp or aluminium adhesive tape not included.
Place a tube clamp on other end of bellows.
Clamp strapMounting clipExpansion joint connector assembly.
Use a vice or clamp to secure loose workpieces.
Clamp heating element to frying basket suspension.
Sealable with clamp and rubber ring.
Clamp the hilum for a vascular exclusion.
Close the hose clamp on each syringe.
The clamp should be facing toward the.
Sheath cable is centered in clamp before tightening up on it.
This clamp for tube positioning only.
Attach the ground clamp to the workpiece.
Cross clamp with ratchet handle clamping.
In thin gauge sheet metals it is best to clamp.
Do not clamp the cut off end.
Install and tighten tube clamp bolt.
Tighten duct clamp to secure it to the plenum.
Gonna need the angled vascular clamp.
Knurled clamp area for optimal stability.
Gas burner with support and clamp.
The work clamp installs in two positions.
Then tighten the needle clamp screw.
Do not clamp the machine with pincers.
Abrasion protection via external clamp profi le.
Close the clamp to secure the monitor.
Pull out lever to open paper clamp.
Turn the clamp fasteners to the side.
Fasten the bag with a sturdy clamp.
Close blade clamp by pushing lever down.
Clamp screws should be on opposite sides of pipe.
The needle clamp screw is too loose.
Clamp the workpiece securely in the vise.
