Examples of 'clamping' in a sentence
Meaning of "clamping"
Clamp (verb) - to hold or secure something tightly in place using a clamping device
Show more definitions
- present participle of clamp
- The act by which something is clamped.
How to use "clamping" in a sentence
Basic
Advanced
clamping
Clamping force is generated according to actuation torque.
Then tighten the clamping screw firmly.
Clamping off the renal artery now.
First slacken the clamping lever again.
A loose clamping screw could be extremely dangerous.
Firmly tighten two clamping screws which.
Clamping her aorta would kill her.
Dimensions the clamping thickness of the infill.
Clamping screw for a possible ground connec.
Swivel out the clamping lever fully.
The clamping collet should only be used to.
Tighten the blade clamping screw securely.
Use a clamping device to secure the workpiece.
Of two of the three clamping brackets first.
Ground clamping screw for turntables connected.
See also
Tighten the blade clamping screw again.
Automatic clamping of measuring carriage after positioning.
Cross clamp with ratchet handle clamping.
Have the clamping connections correctly installed.
Tighten the rotating table clamping knob.
Standard clamping system for every need.
Slide handle bracket onto clamping bolt.
Loosen the clamping screws two pcs.
Clearance to avoid direct influence of clamping force.
Wide range of clamping devices and accessories.
Remove rear gearcase pulley by clamping locking.
This guy was clamping down on free press.
Stretch sandpaper as tight as possible when clamping.
Fixed clamping and nozzle contact force.
Multiple operations in a single clamping system with.
Close the clamping lever on the tool.
This is best done with special clamping belts.
Release the clamping lever on the tool.
Fit only the middle clamping nut.
Loosen the clamping levers on both sides.
Firmly lock the appliance by clamping it on the.
Screw to adjust clamping force of quickrelease clamp.
Wrench for gear to camshaft clamping nut.
Adjust the leg clamping height if required.
For sticking in of already used clamping pockets.
Turn the clamping screw tight again.
Always use wise or good clamping equipment.
Mechanical clamping of the legs or feet of animals.
Fit the screw with clamping flange b.
The right clamping length is defined immediately.
Release the depth gauge clamping screw.
Lock the clamping knobs of the adapter.
Tighten the depth gauge clamping screw.
All clamping knobs should be operated as instructed.
For the horizontal clamping of workpieces you.