Examples of 'clamping screws' in a sentence
Meaning of "clamping screws"
Clamping screws: Refers to mechanical fasteners that are used to securely hold two or more objects together. These screws are designed with a clamping mechanism to provide a tight and reliable connection. This phrase is commonly used in the field of engineering, construction, and manufacturing
How to use "clamping screws" in a sentence
Basic
Advanced
clamping screws
Firmly tighten two clamping screws which.
Clamping screws to fix the tiller tilt angle.
Loosen the clamping screws two pcs.
Clamping screws secured against loss.
Check regularly if the clamping screws are tightened firmly.
The connection is realized by tightening special clamping screws.
Tighten the clamping screws on both sides to.
Secure the base with the clamping screws.
Loosen the clamping screws in front and back.
Tapped extracting hole between the clamping screws.
Undo the clamping screws with the supplied.
Big ergonomical clamping screws.
All the clamping screws shall be well tightened.
It commences by approximately placing all the elements and their clamping screws.
Loosen three clamping screws on the planer shaft.
See also
Attach the shaft coupling to the motor shaft by tightening the clamping screws.
Loosen the clamping screws from the guide.
Clamp bracket extends far enough beyond burner box to allow installation of clamping screws.
Kick clamping screws on both sides.
Secure them with the clamping screws and nuts.
Insert clamping screws into the bracket and secure.
There are no clamping screws.
Unscrew clamping screws as fas as possible so that a sufficient attachment is ensured.
Securely tighten the two clamping screws supplied with the.
Insert clamping screws into the bracket and secure cooktop to countertop.
The clamping forces are released by rotating the clamping screws in an opposite direction.
Insert the clamping screws into the hold down.
Adjust the tiller to the position you want and tighten both clamping screws.
Firmly tighten two clamping screws which secure the.
Clamping screws to fix the adapter for connecting the remote steering.
Retighten the clamping screws with the hex key.
Finally tighten first the centre clamping screw and then two outer clamping screws.
Make sure that all clamping screws are tightened correctly.
The connection is simpler and less bulky than a known connection with two clamping screws.
Undo both the clamping screws on the insertion openings.
When done, firmly tighten the clamping screws.
Routinely check any clamping screws and tighten them if necessary.
To do this, first loosen the clamping screws.
Tighten the clamping screws on both sides to secure the lower handle.
After adjusting, tighten all the clamping screws securely.
Tighten the clamping screws starting with the central clamping screw.
For desired angle, tighten the clamping screws on its sides.
Check clamping screws are secure after adjusting before using the planer.
Align the hub and tighten the clamping screws until they have contact.
In some embodiments, the pullout prevention members are clamping screws 58.
Frequently check the arm clamping screws and tighten them if required.
The connection terminals are provided with clamping screws 40.
Use a screwdriver to tighten clamping screws against the bottom of the countertop.
To change the height of the tail end, loosen the clamping screws 5.
The two inner screws are clamping screws for securing the griddle in place.
You'll also be interested in:
Examples of using Clamping
Show more
Clamping force is generated according to actuation torque
Then tighten the clamping screw firmly
Clamping off the renal artery now
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
