Examples of 'coiling temperature' in a sentence
Meaning of "coiling temperature"
Coiling temperature refers to the specific temperature at which a material or substance is coiled or wrapped around a cylindrical form. This term is commonly used in manufacturing processes such as in the production of metal coils or wires for various applications
How to use "coiling temperature" in a sentence
Basic
Advanced
coiling temperature
This cooling temperature was used as the coiling temperature.
Maintenance of the correct coiling temperature is therefore of great importance.
Coiling temperature control diagram.
New method of control of the coiling temperature on wide strip mills.
Coiling temperature also is controlled to minimize aluminum nitride precipitation.
It is not necessary to specifically limit the lower limit of the coiling temperature.
The coiling temperature should not be chosen too low.
The sides undergo an overoxidation according to the coiling temperature and the coil mass.
Finishing temperature and coiling temperature control can be achieved either by using computer or manual.
These results show once again the significant influence of coiling temperature after hot rolling.
A coiling temperature after finishing rolling is an extremely important production condition in the present invention.
A cooling stop temperature and the coiling temperature are substantially equivalent to each other.
The coiling temperature after hot rolling depends on the processing after hot rolling.
The rate of average downgrading for coiling temperature outside tolerance has been reduced by half.
This coiling temperature CT comes close to a bainite transformation temperature for the aforementioned chemical composition.
See also
That temperature depends on the target coiling temperature and the cooling achievable in the trimmer.
There was no significant effect of B addition on ductility regardless of coiling temperature.
This is achieved by observing the coiling temperature range specified in accordance with the invention.
Subsequently, the steel sheet is cooled to the coiling temperature.
The coiling temperature Tcoil.
Cooling the steel down to the coiling temperature Tcoiling.
The reroll coiling temperature is an important parameter which also relates to Mg2Si precipitates.
Incidentally, a completing temperature of the third-stage cooling step is a coiling temperature.
New method of cont » ollino coiling temperature in a wide hot strip mill.
Preferably, the steel strip is direct quenched directly to the coiling temperature and coiled.
However, since the coiling temperature is low, diffusion is almost not performed.
After finishing the hot rolling, the hot rolled strip is cooled to the coiling temperature.
However, a too high coiling temperature poses problems such as thickening of scale.
To suppress the pearlite generation, a preferable coiling temperature is 700°C or below.
The coiling temperature is set to °C or lower.
The hot-rolled strip is cooled to its coiling temperature by sprinkling it with water.
The coiling temperature CT is given in °C.
This effect is almost identical whatever the coiling temperature of the hot-rolled sheet.
The strip coiling temperature is preferably higher than 750 degrees Celsius.
Improved control of strip coiling temperature see Fig . 8.
The coiling temperature of the strip is preferably higher than 700 degrees Celsius.
As was explained previously, the coiling temperature in the present embodiment is below 95 ° C.
The coiling temperature after hot rolling is defined in a temperature from room temperature to 670 °C.
It is more preferable that the coiling temperature is 590°C or lower.
When a coiling temperature is lower than 700°C, it is difficult to exfoliate scales during mechanical descaling.
Accordingly, it is preferable that the coiling temperature is equal to or more than 400°C.
If the coiling temperature exceeds 630 ° C, a large amount of pearlite is formed.
Therefore, the lower limit of the coiling temperature is set to 250°C or higher.
A coiling temperature greater than 590 ° C. leads to the formation of undesirable surface oxides.
According to one embodiment, said coiling temperature is higher than the bainite start temperature Bs.
Next, the process consists in coiling the strip at a coiling temperature of 250 ° C. or below.
In an embodiment the coiling temperature prior to immersion is at most 650°C.
From the viewpoint of descaling ability, the coiling temperature is preferably 950 °C or less.
When the coiling temperature is below 350°C, hard martensite harmful to the bore exapandability is formed.
To reduce a cold rolling load, the coiling temperature is preferably 420°C or higher.
You'll also be interested in:
Examples of using Coiling
Show more
Check the coiling function of the hose
Procedure is cerebral angiogram and coiling of aneurysm
Endovascular coiling is used to treat cerebral aneurysms
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
