Examples of 'collector of the transistor' in a sentence
Meaning of "collector of the transistor"
The phrase 'collector of the transistor' refers to one of the three terminals in a transistor, with the other two being the emitter and the base. The collector is responsible for collecting or receiving the majority of the current flowing through the transistor. This term is commonly used in electronics and electrical engineering when discussing the operation and characteristics of transistors
How to use "collector of the transistor" in a sentence
Basic
Advanced
collector of the transistor
In that case the contact will be the collector of the transistor.
A collector of the transistor Tr4 is connected to the base thereof.
This active area will form the intrinsic collector of the transistor.
The collector of the transistor T2 is connected to the base of the interrupt transistor.
The output signal appears across ground and the collector of the transistor.
The collector of the transistor Q1 can be connected to another supply voltage terminal or ground.
A voltage source V is connected between the collector of the transistor and earth.
The collector of the transistor Q1 is a p-type isolation region contained within the substrate.
This immediately results in an overvoltage at S, on the collector of the transistor.
The collector of the transistor Q6 is connected to earth potential.
The measuring signal is regained in an amplified state at the collector of the transistor Q2.
The collector of the transistor Q 3 is connected to the switched live wire.
This output voltage varies depending on the load applied to the collector of the transistor T2.
The collector of the transistor Q 2 forms a first switching input EC 1 for the switching circuit.
The other terminal of this parallel-connected circuit is connected to a collector of the transistor Tr1.
See also
The collector of the transistor T 5 is coupled to the output stage ES.
Vs is the output voltage on the collector of the transistor T3.
The collector of the transistor Q2 is connected to the voltage Vcc.
This connecting point is also connected to the collector of the transistor Q2.
The collector of the transistor 11 is connected to its base.
Its drain is also connected to the collector of the transistor T 2 of the core C 1.
The collector of the transistor is shown as being driven by a terminal 17.
The node U of this first resistive bridge is connected to the collector of the transistor T3.
The collector of the transistor 2 is connected to an output terminal 11 by a connecting capacitor 7.
A capacitor 6 is connected between the collector of the transistor 2 and the electrode 1.
Further, the collector of the transistor 217 is connected to the ground of the circuitry.
The output of the current limiter is made on the collector of the transistor 47.
A resistor 36 connects the collector of the transistor 32 to the positive pole of the voltage supply.
The output of the onboard receiver is taken at S ' on the collector of the transistor 67.
A collector of the transistor Tr11 is directly connected to the ground.
Vs is the output voltage on the collector of the transistor ( point S ).
The collector of the transistor T0 is then at ground potential ( the high level ).
The inductive load 2 is coupled with the collector of the transistor 7 by a capacitor C 3.
The collector of the transistor 34 is also connected to the ground circuit M through a capacitor 49a.
Here, this output is the collector of the transistor T9.
The collector of the transistor 133 is connected with the RC pin No.
Current-switching circuit is connected to the collector of the transistor Q 1.
A base and the collector of the transistor Q ₁ are short-circuited.
This base is connected vía a resistor R6 to a collector of the transistor Tr2.
The collector of the transistor Q17 is connected to voltage Vcc vía a constant current source 33.
The output of the circuit is taken on the collector of the transistor Q4 through a capacitor C11.
The collector of the transistor T5 produces a current " Idet " used for creating the error signal.
The base of a transistor T6 is connected to the collector of the transistor T3.
The collector of the transistor T 2 is connected to earth through a resistor R 4.
The cathode of a diode D3 is connected to the collector of the transistor T1.
The collector of the transistor T 1 is connected to the cathode of the diode D 1.
A bulb B1 is connected in series with the collector of the transistor T1.
The collector of the transistor T42 is connected to the voltage Vcc.
The base of the transistor T4 is linked to the collector of the transistor T1.
The collector of the transistor T 3 is connected to the base of the transistor T 4 via a resistor R 3.
You'll also be interested in:
Examples of using Collector
Show more
I heard he used to be a collector like us in another town
City collector for waste collecting vessels
Your uncle was quite a collector of many things
Examples of using Transistor
Show more
Do not perform transistor measurements on live circuits
Overcurrent at the brake chopper brake transistor
It only indicates if the transistor is operating or not
