Examples of 'voltage of the transistor' in a sentence
Meaning of "voltage of the transistor"
voltage of the transistor - This phrase refers to the electrical potential or difference in charge present across the terminals of a transistor. It is a key parameter in the operation and performance of the transistor, influencing its behavior and functionality in electronic circuits
How to use "voltage of the transistor" in a sentence
Basic
Advanced
voltage of the transistor
Of charge changes the threshold voltage of the transistor.
The collector voltage of the transistor in discriminator 66 is applied to a comparator.
The charge stored affects the threshold voltage of the transistor.
Hence, the threshold voltage of the transistor is also poorly controlled.
The voltage Vdd can be higher than the threshold voltage of the transistor.
The base voltage of the transistor T4 is determined by the collector voltage of the transistor T3.
Deformation of the piezoelectric material 20 is thus slaved to the gate voltage of the transistor.
VT = threshold voltage of the transistor.
The term “ degraded level ” refers to a level offset by the threshold voltage of the transistor.
The drain-source voltage of the transistor T4 remains substantially constant.
Thus, the voltage differential AV is adapted depending on the threshold voltage of the transistor 1.
Thus, when Vcc varies, the drain voltage of the transistor T1 undergoes almost no further variation.
This noise leads to a possible aggregation with the switching threshold voltage of the transistor TR 1.
The gate-source voltage of the transistor 2 is then in the order of ( Vs-Vbat ).
The extent of the surface S 2 influences the value of the threshold voltage of the transistor.
See also
Therefore, the base voltage of the transistor Q2 is given by the following equation ( 8 ).
Furthermore, the comparison with the switching threshold voltage of the transistor TR 1 will be rapid.
The threshold voltage of the transistor is low ( typically, between 2 V and 4 V ).
The emitter of the transistor T5 furnishes the basic voltage of the transistor T1.
Vbe being the base / emitter voltage of the transistor Q 1.
FIG . 5 shows an active modem with amplitude modulation by the gate voltage of the transistor 11.
Vbe 2 is the base / emitter voltage of the transistor T 2.
FIG . 4H represents an example of corresponding behavior of the gate gS 1 voltage of the transistor S 1.
Where VT3 represents the threshold voltage of the transistor Q3.
FIG . 4F represents an example of corresponding behavior of the gate gS 2 voltage of the transistor S 2.
The signal POLAR corresponds to a bias voltage of the transistor M20.
This drop in voltage is equal to the emitter-base voltage of the transistor T1.
More precisely, it rises to VPP+VT, VT being the threshold voltage of the transistor T1.
You'll also be interested in:
Examples of using Transistor
Show more
Do not perform transistor measurements on live circuits
Overcurrent at the brake chopper brake transistor
It only indicates if the transistor is operating or not
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
