Examples of 'connect wires' in a sentence
Meaning of "connect wires"
connect wires: This phrase is commonly used in technical contexts to describe the process of joining electrical wires or components together to establish a connection
How to use "connect wires" in a sentence
Basic
Advanced
connect wires
Connect wires to the power unit connector.
Consult a professional to connect wires as instructed below.
Connect wires to terminals according to list below.
Starting batteries and batteries connect wires.
Securely connect wires with a wire connector.
An exterior socket will be provided to connect wires to a portable device.
Securely connect wires with wire connectors.
Route direct wire through conduit and connect wires as follows.
Connect wires less common wire designations.
Its main utility is to connect wires to sockets or even switches.
Connect wires to the matching numbers of terminals.
The article is used to connect wires or cables other than coaxial cables.
Connect wires as shown in wiring diagrams.
Use only specified wires and tightly connect wires to the terminals.
Connect wires according to wiring diagram.
See also
Wiring the fan per wiring diagram and securely connect wires with wire connectors.
Connect wires before attaching stand.
Wring the fan per wiring diagram and Securely connect wires with wire connectors BB.
Be sure to connect wires according to the wiring diagram.
Using provided waterproof wire connectors, connect wires as follow.
Do not connect wires of different gauges.
After connecting the first box in the series, connect wires as shown.
Connect wires as shown in wiring diagram.
To avoid electrical shock, do not connect wires when circuits are energized.
Connect wires to the module connector.
If labels do not match terminals, connect wires as shown below see notes, below.
Connect wires to terminal block on base.
Round crimp-style terminal Electric wire Connect wires of the same gauge to both side.
Connect wires of the same gauge to both side.
Wiring ( heat pump system only ) 7B Connect wires.
Do not connect wires of the same gauge to one side.
Wiring ( conventional system ) 7A Connect wires.
Connect wires from wall control to each stripped wire.
You can now connect wires directly between entities.
Connect wires only when audio system power is off.
You should never connect wires outside of electrical boxes!
Connect wires to the thermostat as shown in the applicable wiring diagram.
Do not connect wires of different gauge to the same grounding terminal.
Connect wires from switch to heater before mounting the housing.
Do not connect wires of different gauges . WRONG.
Connect wires to screw terminals on the control assembly as shown in wiring diagram.
Do not connect wires of the same gauge to one side . WRONG.
Connect wires for pump and boiler controls to their respective output.
Securely connect wires with wire connectors ( supplied ) Figure 19.
Connect wires to the outdoor terminal block by same sequence to indoor unit.
Connect wires from the console to the wires from the console tray.
Connect wires to the system terminal block or fused disconnect inside the enclosure.
Connect wires to the control station and replace the control station cover.
Connect wires to the terminals and rout the cable through the cable gland.
Connect wires to the small and large connections on the rear of the ignition module.
You'll also be interested in:
Examples of using Wires
Show more
Do not operate if wires and terminals are exposed
Wires can be difficult to see when flying
Connect house wires to ventilation fan wires
Examples of using Connect
Show more
Connect the adapter into a main socket
I feel the need to connect with someone
Connect stereo headphones or powered external speakers
