Examples of 'contact angle' in a sentence
Meaning of "contact angle"
In physics and material science, the 'contact angle' is the angle formed between the solid surface and the tangent to the liquid droplet at the point of contact. It is used to describe the wetting properties of liquids on different surfaces
How to use "contact angle" in a sentence
Basic
Advanced
contact angle
Test ink and contact angle method.
The contact angle is an indicator of hydrophobiciy of fabrics.
Until the maximum contact angle is obtained.
Contact angle measurement in degrees using water.
The effect of surface roughness to contact angle.
A zero contact angle θ represents complete wetting.
It can be characterised by measuring the contact angle of a.
Measuring contact angle on wooden surfaces.
An alternative measure of hydrophobicity is the contact angle.
Dynamic contact angle in three chemically different systems.
The angle θ is called the contact angle.
The contact angle is again measured.
Two methods were used to measure contact angle.
The contact angle of water was measured.
This was confirmed by the contact angle measurements.
See also
The contact angle was measured as follows.
An alternative method is to measure the contact angle.
Such a high contact angle indicates poor wetting.
Samples were taken to measure the contact angle.
A low contact angle indicates a good surface wettability.
Surface energies are commonly measured by contact angle methods.
A low contact angle means a higher wetting liquid.
A quantitative measurement for this parameter is contact angle.
Increased contact angle is not favourable.
This translates to a lower contact angle.
The contact angle is determined with a microscope goniometer.
Surface tension and a contact angle thereof were measured.
The contact angle measurements were performed on this surface.
The method for determining contact angle is as follows.
Contact angle is a measure of wetting behavior.
The drops flattened showing a low contact angle.
Contact angle measurements of the dry particles were made.
The surface treatment was confirmed by contact angle measurement.
The contact angle was measured and expressed in degrees.
A traditional measure of surface hydrophobicity is water contact angle.
The contact angle in the liquid phase is reported.
The wettability can be determined by contact angle goniometry.
All contact angle measurements were conducted at room temperature.
An image recognition software analyzed the contact angle.
A high contact angle indicates high surface hydrophobicity.
Evaluation of surface modification was performed in terms of contact angle.
Contact angle hysteresis is a phenomenon that characterizes surface heterogeneity.
Surface wettability was determined by water contact angle measurements.
The contact angle is zero.
Calculation of surface energy from contact angle data.
Vapour pressure and contact angle are the decisive factors.
It provides a clue for a change of the contact angle.
A significant change in the contact angle with diiodomethane is seen.
Contact angles can be measured using a contact angle goniometer.
The results of the contact angle measurements are shown below.
You'll also be interested in:
Examples of using Contact
Show more
I have little contact with the neighbours
Contact officer for national report if different
We can not contact the victim either
Examples of using Angle
Show more
The angle can be read on the scale jj
Only place he can angle a shot at you
The angle would not make sense
