Examples of 'continuity test' in a sentence
Meaning of "continuity test"
continuity test - an electrical test performed to check the integrity and functionality of a circuit or electrical component to ensure that there are no breaks or interruptions in the flow of current
How to use "continuity test" in a sentence
Basic
Advanced
continuity test
Never perform a continuity test when volt.
Modification of audio indication threshold in continuity test.
Continuity test of the protection wires.
Continuous beep for the continuity test.
Press the continuity test button.
Symbol for the acoustic continuity test.
Use the continuity test to check whether a circuit is.
It also features an audible continuity test.
Continuity test indicates open or loose terminal connections.
Capacitors in a circuit before making any continuity test.
Continuity test with multimeter.
Follow these steps to perform audible continuity test.
Press to switch to the continuity test function is shown on the display.
All circuits must be isolated before an insulation or continuity test.
Do not perform resistance and continuity test on a live circuit.
See also
Faults such as this are very hard to detect in an electrical continuity test.
The continuity test is always active and the buzzer sounds when.
Continuous beep sound for the continuity test and for the.
The soil continuity test is carried out between PE conductor and accessible metal parts.
The selection takes place in the same manner as in the continuity test.
Now a visual inspection or a continuity test will help you make a final diagnosis.
The IFD can overcome the testing limitations of a continuity test.
Buzzer Continuous beep for continuity test Discontinuous beep when pressing keys and excess indication.
To avoid electric shock never test a diode or conduct a continuity test on an energized circuit.
Diode test, continuity test and backlight.
This feature is disabled for AC current diode test and continuity test measurements.
Continuity test with Long-Life lithium battery.
Press the FUNC button to select continuity test.
Continuity test is available to check open / short of the circuit.
Pushing MODE key and select continuity test.
The continuity test can be used for acceptance, upkeep or fault location testing.
Use Clamp Meter to run a continuity test.
In continuity test mode, the RANGE button is disabled.
Resistance, diode test and audible continuity test.
Switch over to continuity test with the button MODE 3.
This feature is disabled for resistance, diode test and continuity test measurements.
The symbol for the continuity test ( I ) appears on the LCD display.
Press the button " SELECT " in order to switch to the acoustic continuity test range.
With continuity test the buzzer will sound if the resistance is below 100 Ω.
Set the rotary function switch to / continuity test or diode test.
Continuity test If resistance is < 30Ω buzer and the continuity indicator is ON.
There are two common ways to test a connection, A continuity test.
The first business continuity test of the Health Insurance Fund was done In March 2012.
Switch between AC and DC current measurement ; switch between Ω, diode and continuity test.
Do not perform resistance, capacitance, temperature, diode and continuity test when voltage is present.
The integrity of the optical fibre 11 can be determined using a continuity test.
Fig . 5, Use of the instrument for Resistance measurement and Continuity test.
Furthermore, the cable assemblies are subject to a 100 % voltage and electrical continuity test.
Additional resistance measurement up to 2000 Ohm and acoustic continuity test.
You'll also be interested in:
Examples of using Continuity
Show more
Business continuity and disaster recovery planning
Tone operates in either continuity or status modes
Continuity is an extremely crucial element in international development
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
