Examples of 'control screw' in a sentence
Meaning of "control screw"
Control screw: This phrase is commonly used to describe a mechanism, device, or method that regulates, adjusts, or manages the level, intensity, or functioning of a system, process, or equipment
How to use "control screw" in a sentence
Basic
Advanced
control screw
Fluid control screw not open enough.
Oil filling opening and oil level control screw.
The speed control screw is adjustable with a flat screwdriver.
A connection through a whirl chamber to the outlet opening is controlled by a control screw.
The control screw is thus rotatable to advance or retard piston position.
The maximum speed of the snowmobile can be reduced by adjusting the speed control screw.
A speed control screw is provided so that maximum tool speed can be limited variable.
To reduce the maximum speed, rotate the speed control screw clockwise.
Keeping fluid control screw in open position will reduce fluid needle wear.
Optionally the bore comprises an internal screw thread for receiving a control screw 24.
Said means comprise a control screw cooperating with a nut secured to said crenulated annulus.
If spray is too fine, then decrease the air pressure or open fluid control screw.
Turn Stitch balance control screw in either direction as may required.
Rare earth, China intends to operate the control screw.
Here, the oil level control screw is not provided on the rear side.
See also
The correct oil level in gearbox is determined by the control screw Fig.4 - bottom arrow.
Fluid control screw Turn right to decrease flow, left to increase.
FIG . 4 is a sectional view of the control screw mounted on the frame.
Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed . Fig.
Oil filling opening and oil level control screw ( 2 ) Oil drain screw.
The control screw 33 includes a cavity 39 allowing it to be actuated by a key of suitable shape.
The aperture 22 is configured such that it aligns with the control screw 24.
Speed control screw 0 High q Low.
The tube 50 is internally hollow to blacklash-like house inside the above control screw 45.
The top of the control screw 13 is closed by a screw 17 and a seal.
Oil filling opening ( 2 ) Oil level control screw.
The control screw 24 is also referred to herein as a trigger adjustment control screw 24.
Socket bit 7 Low 8 High 9 Speed control screw 0 Switch trigger q.
The distraction control screw 43f thus defines appropriate joint distraction means 102.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
