Examples of 'corrosion rate' in a sentence
Meaning of "corrosion rate"
the speed or rate at which a material or substance deteriorates or wears away due to corrosion
How to use "corrosion rate" in a sentence
Basic
Advanced
corrosion rate
Decrease corrosion rate with different chemical.
Application of gravimetric methodology to obtain corrosion rate.
Corrosion rate of the canning material.
The role of pH in the corrosion rate of iron.
The corrosion rate after this period continued to decrease.
The method includes measuring corrosion rate.
Low general corrosion rate were found.
The hydrocarbon solution has a low corrosion rate.
The corrosion rate in each of these zones varies considerably.
Two modes of measurement of corrosion rate were employed herein.
The activity currents are proportional to the corrosion rate.
The corrosion rate of carbon steel was remeasured in this mixture.
This determines the corrosion rate.
If corrosion rate does not change then fouling factor is measured.
The addition of inhibitors reduced the corrosion rate.
See also
The equation predicts the corrosion rate in a reducing environment.
The corrosion rate in the sulfuric acid was measured as follows.
One point of improvement to be suggested is considers the corrosion rate.
The corrosion rate was calculated from the weight loss.
Gamma irradiation has little effect on the corrosion rate.
Corrosion rate can be determined.
This behavior is referred to as temporarily reducing the corrosion rate.
Background corrosion rate.
The lower iron concentration is indicative of a lower corrosion rate.
Tolerable corrosion rate.
The lower is the pH the higher is the corrosion rate.
Circuit corrosion rate.
Corrosion rate is also a function of the dissolved oxygen concentration in water.
This results in a decreased corrosion rate for the heat exchangers.
The corrosion rate was determined using the polarization resistance technique.
This value needs to be subtracted before evaluating the corrosion rate.
If corrosion rate increases then instability in the corrosion rate is measured.
Chloride also tend to increase the corrosion rate of superheater tubes.
The corrosion process can be quantified by the provision of a corrosion rate.
Ba had a negative effect on the corrosion rate and sample growth.
The corrosion rate can be measured with the following tests methods.
A number of factors affect the corrosion rate and these are discussed below.
The corrosion rate of reinforcement is strongly influenced by the concrete compressive strength.
With the weight loss results it was possible to calculate the corrosion rate.
It also reduces the corrosion rate and is therefore advantageous in acidic environments.
If no instability is detected then the method is started again by measuring corrosion rate.
It measured the corrosion rate against various environmental factors and climatic conditions.
A positive correlation was found between quantity of evolved hydrogen and corrosion rate.
The corrosion rate is further reduced in the presence of tetra alkyl ammonium hydroxide.
The mass loss was used to make an additional estimate of the corrosion rate.
The corrosion rate was calculated from the weight of metal lost during test.
Cu almost has no effect on the corrosion rate but reduces the sample growth.
The corrosion rate clearly has a minimum point at very low amounts of ammonia.
The samples at each condition were then averaged and reported as the corrosion rate.
A liquid that has a high corrosion rate in steel or aluminum is also a corrosive material.
You'll also be interested in:
Examples of using Corrosion
Show more
This will prevent corrosion of electrical components
Corrosion can form under such residues
Chlorine causes corrosion on such metal surfaces
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
