Examples of 'corrosion test' in a sentence
Meaning of "corrosion test"
is a process or experiment conducted to assess the extent of corrosion or the resistance of a material to corrosion. It typically involves subjecting the material to certain conditions that promote corrosion
How to use "corrosion test" in a sentence
Basic
Advanced
corrosion test
An accelerated corrosion test was carried out as follows.
Reference to in vitro skin corrosion test.
Corrosion test same test lot for a retest.
High temperature generalized corrosion test installation.
Cyclic corrosion test cabinets ControlArt.
Valid and accepted in vitro dermalskin corrosion test e.
The above glass corrosion test is carried out.
No corrosion test results are reported for this treatment.
A procedure of the corrosion test is as follows.
The test used is herein called as scab corrosion test.
Database on corrosion test data.
No agitation of the solution is made during the corrosion test.
Atmospheric corrosion test sites.
Corrosion test in the form of an instantaneous test with hydrochloric acid.
Bilogarithmic representation of atmospheric corrosion test steels results.
See also
No corrosion test is required.
Each sample was degreased in acetone before being subjected to the corrosion test.
Hydrogen corrosion test.
The fabricated plated steel plate was subjected to a cyclic corrosion test.
The procedure for this corrosion test is described in the examples below.
The fabricated plated steel plates were subjected to a cyclic corrosion test.
Results from the corrosion test and sectioning of the test samples.
The evaluation of the corrosion resistance by a cycle corrosion test was similar.
The corrosion test has to be carried out with the necessary safety precautions.
The corrosion endurance of surface treatments was tested by a simple corrosion test.
The corrosion test was effected by placing the coupons in distilled water at ambient temperature.
Uncoated reference samples showed heavy corrosion after the corrosion test.
The cyclic corrosion test was conducted for four weeks on all of the panels.
The corrosion resistance in an actual environment can be evaluated by a cycle corrosion test.
The corrosion test have been performed on samples taken at different location of the coil.
Mass loss means the mass of coating consumed during the corrosion test.
The sample was then subjected to the corrosion test described above for five weeks.
The sample was kept in air at room temperature overnight before the corrosion test.
The sample was then subjected to the corrosion test described above for two weeks.
The scribed panels then were exposed for one week to the GM scab corrosion test.
The cylinders were subjected to a cycle corrosion test under the same conditions as described above.
The painted and dried panels are subjected to a standard Salt Spray Corrosion Test.
The characterisation of corrosion test sites in the Community.
Table 2 shows the results of the corrosion test.
Metal plate for corrosion test Corrosion inhibitor test.
From the welded panels samples for tensile and corrosion test were prepared.
Accelerated corrosion test by modified immersion CALM.
Testing is usually conducted in 3 animals, one coming from the negative corrosion test.
EU project develops lowcost corrosion test forcrude oil tankers.
Cataplasma Corrosion Test Three samples are prepared according to the tensile lap shear strength test.
In vivo dermalskin corrosion test 1 animal.
After the corrosion test the units were pressure tested with compressed air at 8 bar.
The surface appears unaffected by the corrosion test even after 16 hours of exposure.
The corrosion test results are shown below in Table 1.
Reference to in vitro skin corrosion test in the UN Model Regulations.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Corrosion
Show more
This will prevent corrosion of electrical components
Corrosion can form under such residues
Chlorine causes corrosion on such metal surfaces
