Examples of 'cotter pin' in a sentence
Meaning of "cotter pin"
A cotter pin is a fastening device used in mechanical assemblies to secure two or more parts together. It consists of a pin with a split end that can be expanded and inserted into a hole, holding the parts in place
Show more definitions
- A split pin, the ends of which project through an object being fastened and are bent back to hold it in place.
- A pin or wedge inserted through a slot to hold machine parts together; a cotter.
How to use "cotter pin" in a sentence
Basic
Advanced
cotter pin
Remove cotter pin from rear of burners.
Attach burners to brackets with cotter pin.
Replace cotter pin in side burner bracket.
Pull wheel so it is flush with cotter pin.
Remove the cotter pin and pump handle.
Secure wheel axle using a cotter pin.
Insert a cotter pin into the clevis pin.
Secure pin with cotter pin.
Insert cotter pin and bend ends to secure same.
There is a second cotter pin on there.
Reassemble in reverse order using a new cotter pin.
Remove cotter pin from manual gas control rod.
Spead the ends of the cotter pin to secure.
Remove cotter pin and stud from each burner.
Down to the last cotter pin.
See also
Remove the cotter pin with your right hand.
Reinsert bolt and cotter pin.
Remove cotter pin and cylindrical pin from connection point.
Secure wheel assembly with cotter pin as illustrated.
A cotter pin is required to prevent the clevis pin from loosening.
Insert drawbar pin and securing cotter pin.
Remove the spring cotter pin and withdraw the locking bolt.
The hardware store sold me a bad cotter pin.
Bend the cotter pin tabs outward to lock the pin in place.
Secure the clutch nut with the cotter pin.
Re move the spring cotter pin and withdraw the locking bolt.
Inspection of the locking pin for the cotter pin.
Secure castellated nut was cotter pin and mount hub cap.
And is coupled to the bell crank here by a cotter pin.
Reinsert the cotter pin through this hole and the chute.
It had been disconnected and the cotter pin had been removed.
The ends of the cotter pin should be bent over to secure in place.
Mount depth skid with the cotter pin supplied.
Place the cotter pin perpendicular to the axis of the straight pin.
You need a cotter pin.
Assemble other rear wheel to axle with washer and cotter pin.
Prevent both the pin and cotter pin from slipping off.
Deck slightly to reduce the load from the cotter pin.
Secure castellated nut with cotter pin and mount hub cap.
Install the cotter pin through the hole on the end of the axle.
Fitting the washer and spring cotter pin to the bolt.
Insert a cotter pin in the last hole on the right side of the tube.
Replace the clevis pin and the cotter pin after.
Pull out the cotter pin and disMantle the steering wheel jacket.
I will probably replace it with a stronger cotter pin and it will be fixed.
Ensure cotter pin snaps into place and can not be easily removed.
Carefully bend the legs of the cotter pin back around the axle.
Attach the cotter pin and brake spring to the locknut before installing it.
Reinstall the front deck lift rod and secure in place with the cotter pin.
Remove the screw and cotter pin that hold the burner in place.
