Examples of 'pin plug' in a sentence
Meaning of "pin plug"
A pin plug refers to a type of connector or adapter that is mainly used for audio-visual equipment to allow for the transfer of data or signals. It typically consists of a metal pin that fits into a corresponding socket
How to use "pin plug" in a sentence
Basic
Advanced
pin plug
Mini pin plug cable sold separately.
Applicable to machines with a three pin plug.
Pin plug from connection cable to dome.
Three pin plug.
Pin plug cords not included.
The luminaire comes ready to connect and is fitted with an earthing pin plug.
Use the RCA type pin plug cables for audio and video components except speakers.
Make sure that neither wire is connected to the earth terminal of a three pin plug.
Pin plug for video or DC controlled lenses.
It can accommodate either the double flat pin or the double round pin plug types.
Mains cable with three pin plug fitted North America.
Always grip the Controller unit when connecting an RCA pin plug.
When pin plug cords are not connected, insert the included short-circuit pin plug.
Before cleaning the unit, turn power off and disconnect single pin plug.
Use RCA type pin plug cables for audio / video units except speakers.
See also
When not connecting a turntable, leave the included short-circuiting pin plug plugged in.
Power cable for camera, pin plug with bare black / red end.
NEVER insert the short-circuiting pin plug into.
Pin plug connector ( plugged into terminal connector ) - Power black.
The above example first describes the insertion of a 2 pin plug into the adapter 1.
Connect 2 pin plug from AC power cable to 2 pin plug from control box.
Connect the CD player 's output jacks to this unit 's CD jacks using pin plug cords.
Do not plug a short pin plug into the REC ( recording output ) terminals.
Screws with nuts Insulating gasket Screws for fixing the fairing Grommet Hinge 7 pin plug.
FIG . 5C is an illustrative embodiment of a pin plug for use with a valve sleeve.
Graphics cards that do require separate power use either a 6 or 8 pin plug.
A 12 pin plug for power supply and CAN and LVDS interfaces.
This product is equipped with a 3-prong, grounding pin plug as a safety feature.
An 8 pin plug for power supply and 4- pin LVDS interface.
This cable is required to connect the 7-pin connector to a chart recorder 4mm pin plug.
The appliance is supplied with a standard 13 amp 3 pin plug fitted with a 13 amp fuse.
Remove the lower pin plug and remove the lower roll pin from inside coupling FIG . 30-1.
Microphone with curled cable and 6 Pin plug 2.
FIG . 5 is a view of a wrist pin plug for the compressor of FIG . 1.
It is safer and charges up to 2.5x faster than with a 3 pin plug.
Check presence of voltage in the L1-N clamps of the 7 pin plug.
Check presence of voltage in the L1 - N clamps of the 7 pin plug.
