Examples of 'cover screws' in a sentence
Meaning of "cover screws"
refers to the action of concealing or hiding the screws that are used to secure objects or materials together. It is often done for aesthetic purposes to create a more polished or finished look
How to use "cover screws" in a sentence
Basic
Advanced
cover screws
Remove control cover screws using phillips.
Torque for terminal box cover screws.
Turn the two cover screws clockwise to.
Remove the control head cover screws.
Remove the cover screws on the rear panel.
Wall mounting holes beneath cover screws.
Tighten the cover screws evenly.
Hand tighten the air cleaner cover screws.
Install belt cover screws and tighten securely.
Reinstall four air filter cover screws.
Remove top cover screws and slide cover off.
Remove the sear burner cover screws.
Remove the side cover screws and handle assembly.
Remove two air filter cover screws.
Cover screws a few turns at a time until all are tight.
See also
Remove filter end cover screws using.
Loosen the cover screws and remove the air cleaner cover.
Insert and tighten the cover screws.
Replace lower back cover screws and black plastic spacer.
Locate and remove three cover screws.
Remove side cover screws using medium phillips screw driver.
Oven bake burner cover screws.
Replace any battery cover screws that were removed to access the battery.
Remove eight belt cover screws.
The cover screws are screwed tightly to the speaker and may be difficult to remove.
Replace the front cover screws and tighten.
Loosen and remove the four front cover screws.
Remove the lower access cover screws located on the back.
Remove the infrared searing main burner cover screws.
Loosen side maintenance cover screws and remove cover.
Secure the motor cover with the two motor cover screws.
Remove the motor unit cover screws and set the cover.
Loosen and remove the two motor cover screws.
Loosen the bottom cover screws and lift the top cover.
Make sure to tighten diagonally opposite bottom cover screws a few.
Remove the two top cover screws and the top cover.
Remove top cover from heater enclosure by removing the cover screws.
Remove the terminal block cover screws and disengage.
Reinstall the side maintenance cover and hand tighten the cover screws.
These panels cover screws.
Secure the mounting bracket to the unit with the two end cover screws.
Then screw back the cover screws into the mounting opening.
Install the cable cover and tighten the cable cover screws.
Remove the terminal block cover screws located on the back of the range.
Replace the back cover and lightly tighten the three cover screws.
Loosen and remove the housing cover screws and remove the cover.
They come complete with top covers and allen head top cover screws.
Loosen all of the top cover screws and remove the top cover.
Replace the dome camera cover and tighten the dome camera cover screws using the.
Loosen the side maintenance cover screws and remove the side maintenance.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
