Examples of 'screws' in a sentence
Meaning of "screws"
screw (noun): a cylindrical metal fastener with a threaded shaft, often used with a nut or in a pre-tapped hole for fastening metal parts together
Show more definitions
- plural of screw
- third-person singular simple present indicative form of screw
How to use "screws" in a sentence
Basic
Advanced
screws
The screws are provided in the literature pack.
Fully tighten screws with hex wrench.
Screws are visible on the burner control panel.
Make sure the screws are securely tightened.
Screws can be removed by reversing the motor.
Check all fan screws for tightness.
Use screws to attach each trim to oven.
Check fan blade screws for tightness.
Medium screws in softwood or small screws in hardwood.
Retighten mounting screws on any loose part.
All screws must be installed into wood.
Sometimes the deejay screws up your playlist.
Remove screws attaching handles to door frames.
Do not tighten the screws at this stage.
X screws for fi tting the motor unit.
See also
Remove the four screws highlighted below.
Screws and crossbar made of galvanised steel.
Reattach the screws in the remaining holes.
Tighten properly the connection block screws.
Remove screws holding the tool holder.
Replace the front panel with screws.
Bracket and screws for server racks.
Secure bracket to floor using screws supplied.
Retain the screws for later instructions.
Tighten the hexagonal screws using the.
Keep the screws in the drawer front.
Now tighten all six screws fully.
Make sure all screws are tightened correctly.
Tighten the top and bottom screws.
Screw both screws on the rear side.
Fasten it with the four supplied screws.
Unscrew both screws on the rear side.
Do not fire the tool without screws.
The installation screws should be fi tted as follows.
Tighten weight and hour axis screws.
Ensure that all screws are properly tightened.
Hang the hood onto the screws.
Loosen the screws and remove the.
Loosen the two socket headed screws.
Reinstall screws in holes after hinges are removed.
Do not tighten the screws firmly yet.
Insert screws in hinge holes on dryer cabinet.
Install the anchors and screws supplied.
Remove top screws from dryer cabinet.
Check and tighten all engine screws.
Check tightness of screws carefully before operation.
This makes it easier to turn the screws.
Remove the screws and pump housing.
Fix the handles with the screws.
Tighten all screws and nuts securely.
