Examples of 'covering cap' in a sentence
Meaning of "covering cap"
Covering cap: A protective cap or cover used to shield an object from dirt, damage, or unwanted exposure. It is commonly used in reference to covering or protecting items such as bottles, pens, or electronic devices with detachable caps
How to use "covering cap" in a sentence
Basic
Advanced
covering cap
Remove covering cap and salt lid.
The covering element may be executed as a covering cap.
Push the covering cap over the handlebar clamp.
Do not use the heater without the covering cap.
This covering cap could be provided with means of electric connection.
To exchange the cutting blades the covering cap must be released.
The covering cap is used to cover unecessary openings on the front plates.
The time setting and light value switches are located behind the covering cap.
Remove the plastic covering cap and the screws from the right and left side panels.
In one embodiment the two legs are placed between the covering cap and the stopper.
Use the supplied covering cap to mask specific areas fig . 8.
Mask 3 can then be deposited on other areas of the substrate covering cap layer 5 not.
In that case the covering cap 10 is integrally formed with the link.
As it is known, this crucible is associated to the covering cap 4a.
Cable duct connector Covering cap for front cover.
See also
The earthing studs 15 consist of a screw bolt with a screwed on covering cap.
Moreover, it is necessary to produce a covering cap which is different for every angle.
A covering cap 15 engages the main body portion in an air tight seal thereat.
Figure 15 shows a plug with a praline and covering cap in a package consisting of a plastics pouch.
To close the opening after insertion of an intermediate sliding plate 13, a covering cap is provided.
Use of the supplied, customisable covering cap for masking specific areas Fig . 9.
Figure 4 shows the embodiment of Figure 3 in fully opened position of the covering cap 18.
In this embodiment, a covering cap can be moreover provided, not specifically shown, as in Example 1.
It is essentially composed of an ampoule 2, an injector 3 and a needle-holder covering cap 4.
Remove the covering cap by turning it slightly to the left fig . 2.1.
The collapsible container 22 is fitted with a collapsible container outlet 24, which has a removable covering cap 25.
The covering cap 34 is provided with a hole at the dispenser orifice 31.
Style, covering cap.
This covering cap 22 constitutes a part for thrust of the brake discs of the stack 21.
Preferably at least the covering cap 10 and the snap pin 19 are integrally formed.
