Examples of 'cracking resistance' in a sentence
Meaning of "cracking resistance"
cracking resistance: Refers to the ability of a material or substance to withstand cracking or breaking under pressure or stress
How to use "cracking resistance" in a sentence
Basic
Advanced
cracking resistance
The cracking resistance is thereby further improved.
Very good chipping and cracking resistance.
The season cracking resistance was evaluated as follows.
Polyethylene composition having high stress cracking resistance.
It has a higher cracking resistance than the standard cultivars.
W is effective in improving the stress corrosion cracking resistance.
Age cracking resistance was excellent throughout all the samples.
Sulfide stress cracking resistance.
It is considered that a molded article is thereby improved in cracking resistance.
Sulphide stress cracking resistance.
Polyethylene composition for blow molding having high stress cracking resistance.
Sustained load cracking resistance.
Polyethylene composition having high impact and stress cracking resistance.
Good chemical and stress cracking resistance to inorganic salt solutions.
W has an effect to improve the stress corrosion cracking resistance.
See also
The notch cracking resistance is an index of the durability required in corrugated board printing.
This is said to achieve better cracking resistance under ozone stress.
It also generally improves corrosion and hydrogen assisted cracking resistance.
The stress cracking resistance increases with increasing thickness of the barrier layer.
Duplex stainless steels generally have good hot cracking resistance.
This material impresses with its superior cracking resistance when exposed to extremely cold temperatures.
Steel for steel pipe having excellent sulfide stress cracking resistance.
Stress cracking resistance is better than that of HDPE.
Reduction of sulphur and phosphorus were also found as solutions to increase delayed cracking resistance.
The alloy exhibits adequate stress corrosion cracking resistance in view of the chromium content.
The measurement of HRC was made from the viewpoint of evaluation of season cracking resistance.
The alloy will exhibit adequate stress corrosion cracking resistance in view of the chromium content.
Stress cracking resistance was assessed according to the following system,.
The alloy product may pass other stress corrosion cracking resistance tests as well.
The environmental stress cracking resistance ( ESCR ) of the polyethylene compositions was also tested.
It is less notch sensitive then HDPE and has better stress cracking resistance.
In addition, stress corrosion cracking resistance was also deteriorated.
It can be used to make thinner films, with better environmental stress cracking resistance.
In particular, high stress cracking resistance and die swell are required.
The larger the number of times, the better the cracking resistance.
When the amount is too small, the season cracking resistance and strengthening effect are insufficient.
Further, the full ester satisfying the above condition is excellent in cracking resistance.
M 40 index of cracking resistance of the cokes.
Weld examination Sulphide stress cracking resistance.
This will provide good processing characteristics, gloss, impact resistance, and environmental stress cracking resistance.
As compensation, any proportion provides excellent cracking resistance at very low temperatures.
That is, the oil well pipe has excellent stress corrosion cracking resistance.
Further, the stress corrosion cracking resistance ( SCC resistance ) may be deteriorated.
Theses properties include good flexibility, high elongation, and good cracking resistance.
Table 1 shows the environmental stress cracking resistance ( ESCR ) of the polyethylene compositions.
Cu provides a property of making the tensile strength high, and improving stress corrosion cracking resistance.
The Shore A hardness exhibited 41, and the notch cracking resistance exhibited 60 sec. or more.
The ( co - ) polymer thus obtained has substantially low catalyst residues, and an improved stress cracking resistance.
A low MFI signifies a long polymer chain and a good cracking resistance of the polycarbonate.
However, it is known that LDPE suffers from poor environmental stress cracking resistance.
You'll also be interested in:
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
Examples of using Cracking
Show more
Cracking of the test pieces is not allowed
The ice is cracking under the ship
Cracking due to old age of the insulation
