Examples of 'crank angle' in a sentence
Meaning of "crank angle"
crank angle: This term is commonly used in automotive engineering to describe the angle of rotation of the crankshaft in relation to a reference point, typically top dead center
Show more definitions
- The angle of rotation of a crankshaft measured from the position in which the piston is at its highest point known as top dead center (TDC).
How to use "crank angle" in a sentence
Basic
Advanced
crank angle
The crank angle may also be used.
The abscissas show the crank angle.
Crank angle of mixture ignition.
This signal is a crank angle signal.
The crank angle is denoted by a.
This judgement is made based on a crank angle signal.
The crank angle sensor detects angles of an output shaft.
Each routine is executed by interruption every predetermined crank angle.
The crank angle detection device includes a rotor and an electromagnetic pickup.
This routine is executed by interruption every predetermined crank angle.
This is achieved by having a larger crank angle or by reducing the combustion chamber volume.
The threshold value varies with the crank angle.
This decision is made based on a crank angle and repeated until the timing is reached.
The routine is executed by interruption every predetermined crank angle.
When the crank angle signal θ shown in FIG.
See also
Static advance with respect to top dead centre crank angle degrees.
AaA is the crank angle at which ignition has to be achieved.
This provides improved reliability to detect the reference crank angle position.
When a crank angle signal θ FIG.
The manifold absolute pressure is then preferably measured at this crank angle.
It 's to do with the crank angle and cylinders.
The compression ratio in each of the cylinders is proportional to the crank angle.
Therefore, the target crank angle θT is large.
Fuel injection timing and ignition timing are controlled based on the detected crank angle.
In the abscissa, the crank angle degrees are shown as previously indicated.
This requires adequate time for more reliable determination of the reference crank angle position.
Detection of the rotational speed or crank angle of the crankshaft 12 is thus performed.
The value TFMAX may also be a value corresponding to a predetermined crank angle.
A crank angle sensor 16 is located near the rotational locus of the magnetic projections.
Static advance with respect to Top Dead Center crank angle degrees.
A discrimination of the crank angle is conducted when the throttle valve is " opening " operated.
Specifically, the threshold value differs at each crank angle.
The crank angle sensor 57 outputs pulse signals with a frequency corresponding to an engine speed.
For each situation, the horizontal axis represents crank angle θ.
The valve-opening timing is set as a crank angle relative to the valve-closing timing.
Method as claimed in claim 1, wherein the signal is acquired as a function of crank angle.
CA y is the crank angle at which y % of the fuel has been consumed.
Figure 2 is a data graph of cumulative heat release plotted against crank angle.
The crank angle sensor 17 can also detect the engine speed.
The pseudo-sinusoidal curve indicates the piston speed vs crank angle.
The crank angle signal is generated by the engine position sensor 115.
The dispersion associated with normal combustions is of the order of 4 ° crank angle degrees.
A crank angle sensor 12 is opposed to the circumferential surface of the sensor magnet 11.
Figure 7a shows schematically the improved press cycle diagrammed in terms of degrees of crank angle.
Engine of a single-cylinder type having a crank angle detecting device, comprising,.
Hereinafter, the rotation angle of the crankshaft 13 is referred to as a crank angle.
The crankcase 25 has a crank angle detector 67 disposed in a rightward interior region thereof.
The fuel injection control is carried out every specified crank angle ( CA ) by cylinder.
The indicator can be the crank angle where 10 % of the energy introduced has been released.
FIG . 5 is a schematic diagram showing the positional relation between a crank angle sensor and a sensor magnet.
