Examples of 'curing reaction' in a sentence
Meaning of "curing reaction"
curing reaction: This phrase refers to a chemical process or reaction that leads to the hardening or solidification of a substance, usually through the use of heat, light, or a catalyst. It is commonly used in the field of chemistry or materials science
How to use "curing reaction" in a sentence
Basic
Advanced
curing reaction
The curing reaction is known as cyclotrimerization.
It is preferred to perform the curing reaction without a catalyst.
The curing reaction can be accelerated by applying heat.
As a catalyst for the curing reaction a strong acid is used.
Curing reaction catalysts as follows.
The free isocyanate then undergoes the curing reaction.
Curing reaction catalysts.
Atmospheric oxygen does not affect the described curing reaction.
Adjustment of the rate of the curing reaction is desirable in such cases.
Pressure may also be applied during the curing reaction.
The epoxy curing reaction may be accelerated by addition of small quantities of accelerators.
Extrusion at higher temperatures might entail a premature curing reaction.
The curing reaction takes place by the reaction of unsaturated cycloalkenyl groups.
This induction period is often followed by a rapid curing reaction.
It is considered that the curing reaction efficiency is increased by previously adding the amine.
See also
Radical polymerization is normally employed for a composite resin curing reaction.
The curing reaction occurs when the contents of the two containers are mixed.
Tertiary amines are also useful in catalyzing or accelerating the curing reaction.
The narrow curing range allows the curing reaction to be fast and well controlled.
The paper reports tests of the exothermicity of the curing reaction.
As the curing reaction is exothermic, heat is produced.
Antioxidants which interfere with the curing reaction should be avoided.
The initial film formation takes place by solvent evaporation rather than by a curing reaction.
This is because the heat from the exothermal curing reaction does not readily dissipate.
The ultraviolet radiation serves to provide the energy necessary for the curing reaction.
Thus, a one component curing reaction would be highly desirable.
Suitable acidic or basis catalysts may be used to promote the curing reaction.
Thereby, the curing reaction of the resin can be influenced.
The tertiary amine compound acts as an accelerator for the curing reaction.
However, curing reaction rate at high temperature is too fast to control.
The resultant sheet or film is stored so that the curing reaction proceeds.
The resulting curing reaction may be aided by heat and / or a catalyst.
The powder coating composition can contain a catalyst for the curing reaction.
Such a curing reaction however generally produces carbon dioxide as a by-product.
The bond strength can still increase with progressing of the curing reaction.
The curing reaction can be performed in solution, in the melt or in suspension.
The glass transition temperature of the polymer increases as the curing reaction progresses.
The curing reaction rate in formulation 1 was too fast for many processing applications.
The swelling ratio can be controlled by adjusting the reaction condition in the curing reaction.
In formulation 3, the curing reaction was further delayed because more blocking agent was added.
The two parts are combined upon application of the adhesive to initiate the curing reaction.
After completion of a curing reaction of the polyester resin, the obtained product was cured for 1 h.
Specifically excluded are chemically foaming thermosetting resins wherein the curing reaction generates substantial gas.
During the heating process, curing reaction occurs between the powdered active carbon and the adhesive.
The epoxy resin forms a network structure by the crosslinking by a curing reaction with a curing agent.
The overall curing reaction will take about 5 minutes to about 8 hours.
They may also bear substituents which do not materially interfere with the curing reaction.
The drying agent may bind by-products of the curing reaction such as water and alcohols.
Preferably the material is substantially free of any groups which substantially slowdown the curing reaction.
When the composition includes a solvent, the polymerization curing reaction proceeds uniformly and smoothly.
You'll also be interested in:
Examples of using Curing
Show more
Not the curing but the preventing
Doctors get rich just by curing cataracts
Follow curing directions found on the can
Examples of using Reaction
Show more
It would give its reaction at a later date
Quick reaction times in case of delay s or malfunctioning
I am having a physical reaction to how bad this is
