Examples of 'current clamp' in a sentence
Meaning of "current clamp"
current clamp: In the context of electrical engineering, a current clamp is a device that measures the electrical current flowing through a wire without the need for direct electrical contact. It is often used in troubleshooting and measuring electrical systems, especially in situations where it is difficult to place a traditional current meter
How to use "current clamp" in a sentence
Basic
Advanced
current clamp
Turn the current clamp off.
Only ever surround one conductor with the current clamp.
Disconnect the current clamp from any measured objects.
Voltage clamp is generally achieved by adding a feedback loop to a current clamp circuit.
Open the current clamp with the clamp opening lever.
For higher currents an optional current clamp is available.
Voltage cables and current clamp colours adaptable to the international standards colours.
Easy installation was achieved by using a current clamp for current measurement.
The current clamp does not require maintenance apart from occasional cleaning and.
A switch allows rapid changes between conventional current clamp and summed input.
Leakage current clamp meters are similar to clamp meters used for measuring load currents.
Whole cell clamp is accomplished with a gigaseal under conventional current clamp mode.
Always ensure the correct polarity of the current clamp for direct current measurements.
Surround the conductor that you wish to measure and close the current clamp.
Use a current clamp to ensure that no current is present in the DC cables.
See also
This mode is used for detecting the current in the cable using a current clamp.
Resembling a current clamp in appearance and function is the Rogowski coil current sensor.
Measurement of TRMS leakage and load currents current clamp available as an option.
The current clamp features a backlight so that the LCD display can be read easily.
APs are evoked by injecting depolarizing current and recorded in current clamp mode.
A current clamp member has a pair of S shaped rods.
Sensorfact searched for manufacturers of wireless current clamp sensors and found Pressac.
The leakage current clamp supplies 3 stored limiting values.
This same principle is applied to a current clamp figure 2.
Non-intrusive current clamp to position on the line or on a section and detecting consumption anomalies.
The current is measured wirelessly via the current clamp 1.
Alternatively, the current clamp technique can be used.
The / polarity symbols are located on the front and back of the current clamp.
Generally, spontaneous activity during current clamp showed substantial irregularity.
Thank you for your support through your purchase of an Y4N current clamp.
Ac dc current clamp meter - Quality Supplier from China.
The method comprises electronically adding an IK1 component to cardiac myocytes under current clamp.
The measurement display on the current clamp covers 2000 counts count smallest display value.
Excitation-contraction coupling was demonstrated using combined calcium-imaging and current clamp experiments Fig.
Compatible with current clamp meters of previous models ( adapter required depending on model ) AR5-L.
You will hear 5 beeps 1 minute before the current clamp turns itself off.
With the Current Clamp VC-605 you have acquired a product constructed to the latest technological standards.
Proceed as follows, - Turn the current clamp off.
Note on optional accessories, - Leakage current clamp BENNING CM 9 for differential current measurement of single-phase.
Press the clamp opening lever ( 11 ) to open the current clamp.
Separate the Meterman Current Clamp AC50 from any circuit, and remove the test.
FIGS . 2 and 3 are upper and lower views respectively of the current clamp of FIG . 1.
The current clamp ammeter 23 is in contact with the loom 1 and the oscilloscope 24.
FIG . 1 is a lateral-elevation view of the current clamp of the present invention.
Current clamp for AC current Model MInI 01.
The Morris-Lecar experiments relied on the current clamp method established by Keynes et al . 1973.
Measurement of EM under current clamp shows random oscillations of 5-10 mV amplitude.
You'll also be interested in:
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
