Examples of 'cut-off frequencies' in a sentence
Meaning of "cut-off frequencies"
Cut-off frequencies refer to the frequencies at which a filter or system attenuates a signal by a certain amount. This concept is commonly used in signal processing, electronics, and communication systems to control and manipulate frequency content
How to use "cut-off frequencies" in a sentence
Basic
Advanced
cut-off frequencies
A residual analysis was performed to determine the cut-off frequencies.
Note that both cut-off frequencies of the two filters are.
It is therefore essential to have photodiodes with higher cut-off frequencies.
Different cut-off frequencies could be used if a different range of speeds is required.
Any frequencies in between these two cut-off frequencies are attenuated.
The cut-off frequencies of the filters are represented by triangular markings above the curve.
These filters have low and high controllable cut-off frequencies.
Defining and setting the cut-off frequencies for crossovers and inbuilt filters.
Critical public services can be allocated the lowest cut-off frequencies.
The cut-off frequencies are selected as a function of the type of the particular digital modulation.
Each time you touch c or d selects cut-off frequencies in the following order.
Moreover, analog filters are used for the calibration of the cut-off frequencies.
The selection of the upper and lower cut-off frequencies depends upon the intended use.
The frequencies that separate the different pass and attenuation bands are called the cut-off frequencies.
The cut-off frequencies of the 2 equalizers are at appr.
See also
Setting the subwoofer cut-off frequency You can choose between four cut-off frequencies.
Each press of 2 or 3 selects cut-off frequencies in the following order.
These cut-off frequencies may have to adapt, in practice, to individual heart rates.
It exhibited microwave operation with cut-off frequencies in the 40 GHz range.
The cut-off frequencies ( F 1 and F 2 ) of the filter also are adjustment parameters for the combustion observer.
With such values, the respective cut-off frequencies of the cells are the following,.
The fabricated Schottky diodes show state-of-the-art intrinsic performance with cut-off frequencies nearby 1 THz.
The filter acts to cut-off frequencies above the set-point.
The FA2LP low-pass filter can be configured for 4 different cut-off frequencies.
Where f1 and f2 are the cut-off frequencies of the filter.
The cut-off frequencies of the upper and lower band are 12 kHz and 80 Hz respectively.
Each timeMULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order.
The cut-off frequencies for an RC filter,.
Abstract, In an ever-growing terahertz market, BiCMOS technologies have reached cut-off frequencies beyond 0.5 THz.
Fig . 6shows the principle of different cut-off frequencies and overlaps . PREFERRED EMBODIMENTS,.
You'll also be interested in:
Examples of using Cut-off
Show more
The cut-off has been automatically activated
Geographical localities are selected by cut-off sampling
Of air cut-off pneumatic screwdrivers with
Examples of using Frequencies
Show more
Frequencies can be stored for quick access
I am looking into frequencies but nothing so far
Frequencies may vary depending on the indication
