Examples of 'cutting force' in a sentence
Meaning of "cutting force"
This phrase refers to the amount, strength, or power of force applied when cutting or severing an object or material using a tool such as a knife, saw, or scissors. It implies the force required to achieve a clean, precise, or efficient cut, often used in industrial or mechanical contexts
How to use "cutting force" in a sentence
Basic
Advanced
cutting force
Changing the cutting force and speed.
This signal is proportional to the cutting force.
The cutting force is applied to the head.
The speed determines the available cutting force.
The cutting force is increased by adding an abrasive.
Maximum crushing and cutting force with more efficiency.
Cutting force pushes chain saw toward operator.
Development of cutting force measurement hardware.
Cutting force pulls chain saw away from operator.
The required cutting force was measured.
This approach requires the measurement of the performancerelated cutting force.
Perfect cutting force and grinding.
Minimizing the cutting force.
More cutting force than the previous cutter.
Effective cutting force.
See also
The turning tests indicated large intermittent variation in cutting force.
Specific cutting force unit.
Different methods are provided for quantifying the cutting force of a blade.
Less cutting force.
The purpose of my research was to develop a system to measure cutting force and temperature.
This reduces the cutting force needed to make a cut still further.
This clamping force must be substantially higher than the radial cutting force.
Resultant cutting force.
The cutting force therefore remains constant during the milling process.
A guidance based on the analysis of the cutting force has proved to be particularly advantageous.
The cutting force must be decreased when the required length is achieved.
This can result in disproportionately high cutting force during the first shave.
The cutting force and machine stability both are influenced by machining parameters.
This can result in inconsistencies in the cutting force across the length of a blade.
Maximum cutting force and reach with minimum weight reducing machine movement.
Combine and cancel any extraneous units to achieve the final cutting force.
A correlation has been established between the cutting force reduction and the chip segmentation intensity.
The cutting test helps you verify the knife holder setting and cutting force.
Reduced tip rounding minimizes the increase in cutting force thereby maintaining excellent shaving performance.
The strain gauge may be any suitable strain gauge enabled to calculate the cutting force.
Cutting force To prolong the life of the machine and ensure a fi rst.
Orin therefore realizes that the power to create a cutting force came from himself.
The cutting force measurements envisaged for this subject were all carried out in Turin.
The thicknesses provide a balance between edge strength and low cutting force or sharpness.
The ZXB stands out for its low cutting force that enables higher cutting feed rates.
KASTO Universal Hydraulics UH for continuous adjustment of feed speed and cutting force.
What is the maximum cutting force of a holmatro rescue cutter?
This curvature is what absorbs the wind 's cutting force.
The cutting force progressively increases, at an average rate of about 1 mv per cut.
Categories” to provide more accurate cutting force calculations.
The cutting force " F " is generally perpendicular to the cutting edge of the tool.
Most often, they are arranged in a single helix so as to give a constant cutting force.
For aluminium press parts, these cutting force reducing actions are not recommended.
The transducers are connected to means 75 for displaying the average cutting force.
PS, Cutting force and area can be customized according to your requests.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
