Examples of 'deposition time' in a sentence
Meaning of "deposition time"
deposition time - the scheduled period for giving testimony or providing sworn statements in a legal context
How to use "deposition time" in a sentence
Basic
Advanced
deposition time
It increases with the deposition time.
The deposition time is dependent on the desired aluminum thickness.
And dividing the determined thickness by the deposition time.
The deposition time is chosen as a function of the desired density of nuclei.
This procedure makes it possible to reduce the deposition time.
The upper limit corresponds to a deposition time and to a cost that are reasonable.
The thickness of the layer is determined by the deposition time.
This deposition time however depends on the thickness of the coating that is desired.
You have now wasted ten minutes of your deposition time.
A longer deposition time will yield a thicker DFC coating.
The percolation threshold increased with the prolongation of carbon deposition time.
In addition, the film deposition time t is regulated so as to obtain the desired thickness.
The amount of deposited matter increases well with deposition time or fluence.
In certain cases, moreover, the deposition time at a defined current strength is varied.
Is a graph showing the relationship between the tungsten thickness and the deposition time.
See also
Generally, the longer the deposition time for the coating, the thicker the coating will be.
The inset shows the mass change calculated from Sauerbrey equation as a function of deposition time.
After a predetermined deposition time has elapsed, feeding of DMAH is stopped.
There is no indication that product quality varied with deposition time between 2 and 3 weeks.
The deposition time is set at 1 min.
The coating compositions were applied by immersion at a deposition time of about five minutes each.
The deposition time is 7 seconds.
Figure 7 shows typical results for a polypyrrole film produced after five minutes deposition time.
The deposition time was 30 minutes for all of the samples.
The coating thickness does, of course, increase with deposition time.
Deposition time is 4 minutes.
The support jig bias was reduced to 100 volts for the remaining deposition time.
For example, after a deposition time of 1 hour the coating thickness is about 2 µm.
Coating thickness ( i.e. after impingement of spheres onto the substrate ) increases with deposition time.
The deposition time on steel panels subjected to pretreatment with zinc phosphate was 2 min 40 s.
Figure 15C, Top diameter plotted as a function of ODT deposition time.
The deposition time is adjusted in order to achieve a layer thickness of around 100 nanometers.
With such suspensions the deposition time is approximately 0.3 sec.
The deposition time of the transition layer and coating together was 10 minutes or 5 minutes.
Approx . 2 x DLC deposition time.
Deposition time of each layer, 2 hours.
The CVD environment temperature was 370°C and the deposition time was five minutes.
After a predetermined deposition time has elapsed, feeding of DMAH and Si ₂ H ₆ is stopped.
A deposition time of 3.6 minutes was required for a 5 nm thick deposited oxide.
Preferably, the deposition time ranges from 1 minute to 24 hours.
The deposition time is set at 30 seconds.
The deposition time and working pressure were fixed at 2 h and 0.5 torr respectively.
The deposition time for this layer can vary from 5 to 100 minutes.
The deposition time for this grading can vary from 1 to 10 minutes, typically 5 minutes.
However, the deposition time for the zinc is 24 to 48 hours, depending on the current density.
The deposition time for this bond layer may vary from 3 to 15 minutes, typically 5 minutes.
The deposition time is restricted to give a 1.5 um layer of BN.
The deposition time was 15 minutes at laser fluence 7 J/cm2 and room temperature.
You'll also be interested in:
Examples of using Time
Show more
Spent a lot of time with the ladies
Time and tide wait for no man
A woman needs time to think things over
Examples of using Deposition
Show more
Informal local deposition industrial products waste
I am not going to mention any of that in the deposition
Tailings deposition and water management plans
