Examples of 'depth adjustment knob' in a sentence
Meaning of "depth adjustment knob"
depth adjustment knob: This phrase refers to a mechanism or control on a tool, instrument, or device that allows for the modification or setting of the depth or level of a certain function or feature
How to use "depth adjustment knob" in a sentence
Basic
Advanced
depth adjustment knob
Tighten the depth adjustment knob securely.
Loosen ( counterclockwise ) the cutting depth adjustment knob K.
Depth adjustment knob insulated gripping surface.
Secure using depth adjustment knob.
Depth adjustment knob and then retighten securely.
Loosen the depth adjustment knob.
Depth adjustment knob.
Adjust depth of cut using depth adjustment knob.
Rotate depth adjustment knob counterclockwise.
To increase the depth of cut rotate the depth adjustment knob clockwise.
Rotate depth adjustment knob clockwise to desired depth measurement.
The numbers on the ring under the depth adjustment knob indicate the.
Use the depth adjustment knob to fi nely tune the.
To decrease groove depth, rotate the depth adjustment knob clockwise.
Loosen the depth adjustment knob and move the shoe to.
See also
To decrease the depth of cut, turn the depth adjustment knob anti-clockwise.
Loosen the depth adjustment knob until the shaft slides freely.
The tool depth can be adjusted by using the depth adjustment knob or a 3/8 " socket wrench.
Rotate the depth adjustment knob counterclockwise to increase the cutting depth as desired.
To increase groove depth, rotate the index depth adjustment knob one mark counter clockwise.
The depth adjustment knob regulates or adjusts the puncture depth in accordance with known techniques.
The numbers on the ring under the depth adjustment knob indicate the depth of cut.
Hold the depth adjustment knob with one hand and the handle with your other hand.
After the working procedure, set the depth adjustment knob 2 to position P park position.
Back the depth adjustment knob off to leave proper distance for groove depth figure 5.
To set the desired planing depth from 0 - 3 mm, rotate the depth adjustment knob 2.
Rotation of the depth adjustment knob decreases or increases the puncture depth of the lancet.
For fi ne adjustments less than 5/32 ", use the independent scale on the depth adjustment knob.
Turn the Cutting Depth Adjustment Knob clockwise to decrease the cutting depth.
For fine adjustments less than 5/32 ", use the independent scale on the depth adjustment knob.
Make sure the depth adjustment knob has been retightened ( clockwise ) before operating saw.
The depth to which a nail is driven is controlled by the depth adjustment knob ( A ) Fig . 29.
The index depth adjustment knob must be reset for each diameter of pipe / tube.
The depth to which a fastener is driven is controlled by the depth adjustment knob ( A ) Fig . 29.
Rotate the depth adjustment knob to the desired position and it will “ click ” into place.
After use, always move the depth adjustment knob to the ‘ P'parked position.
D, The depth adjustment knob controls the cutting depth of the iron.
After use, always move the depth adjustment knob to the ‘ P ' parked position.
Rotate depth adjustment knob counterclockwise to "0.
One revolution of the depth adjustment knob is equal to 0.2.
Rotate the depth adjustment knob ( 5 ) clockwise for a deeper cut and anti.
Turn the planing depth adjustment knob ( 5 ) to the required depth of cut.
Loosen the depth adjustment knob and slide the base assembly as far as possible . Fig.3b.
Loosen the depth adjustment knob ( F ) and move the pointer to.
Turn the Cutting Depth Adjustment Knob ( 8 ) anti-clockwise to increase the cutting depth.
Turn the depth adjustment knob ( 4 ) to the desired.
Set the depth adjustment knob to the depth of cut desired in each pass 1/8 " maximum.
Rotate the depth adjustment knob ( 3 ) clockwise for a deeper cut and anti-clockwise for a shallower cut . Fig . 8.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
