Examples of 'depth adjustment lever' in a sentence
Meaning of "depth adjustment lever"
A mechanism or control in certain tools or equipment that allows the user to adjust the depth or height of a specific component. It is typically used in tools such as routers, saws, or drills to control the depth of cuts or holes
How to use "depth adjustment lever" in a sentence
Basic
Advanced
depth adjustment lever
Pull depth adjustment lever upward to release.
Firmly tighten the depth adjustment lever.
Depth adjustment lever requires tightening.
Retighten the depth adjustment lever securely.
The following instructions also apply to adjusting the DW367 and DW368 depth adjustment lever.
To adjust the depth adjustment lever position.
It may be desirable to adjust the depth adjustment lever q.
Pull the depth adjustment lever up to tighten.
Adjust depth of cut using depth adjustment lever.
Adjust the depth adjustment lever by rotating it in the desired.
Pull upward the seat depth adjustment lever.
The depth adjustment lever allows user to control depth of cut.
Loosen the screw securing the depth adjustment lever.
Push down on depth adjustment lever to lock into position.
Your saw also features a adjustable depth adjustment lever for consistent locking.
See also
The depth adjustment lever has been preset for better positioning.
It may be desirable to adjust the depth adjustment lever or the bevel adjustment lever.
Hold depth adjustment lever ( q ) and loosen the locknut t.
Fully loosen depth adjustment lever q.
Loosen the depth adjustment lever by pushing it and adjust the cutting depth.
Move the cutting depth adjustment lever into the upper position.
Loosen the depth adjustment lever located on the right side of the tool.
Let loose the depth adjustment lever 8 during this cut.
Loosen the depth adjustment lever located between the guard and handle of saw.
Move the cutting depth adjustment lever ( 3 ) to the highest setting.
Is the depth adjustment lever for cutting securely tightened?
Loosen the depth adjustment lever 7 of the tool.
Adjust the depth adjustment lever by rotating it in the desired direction about 1/8 of a revolution.
Loosen the depth adjustment lever 21.
Loosen the depth adjustment lever located in the housing of saw.
Fully loosen depth adjustment lever Fig . 5, p.
Make sure the depth adjustment lever has been retightened ( lowered ) before operating saw.
Adjusting depth adjustment lever fig . 7.
Make sure the Depth Adjustment Lever has been retightened ( clockwise ) before operating saw.
Loosen the depth adjustment lever by pushing it and adjust the cutting depth . See Fig.5.
Loosen the depth adjustment lever ( C ) and move the shoe to.
Raise the depth adjustment lever ( J ) to loosen and move shoe to.
Unclamp the depth adjustment lever ( M ) and pull shoe to it 's.
You'll also be interested in:
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
