Examples of 'detected signal' in a sentence
Meaning of "detected signal"
detected signal: Refers to the identification or recognition of a signal or sign, often used in the context of technology or communication systems
How to use "detected signal" in a sentence
Basic
Advanced
detected signal
The detected signal is converted to an analog signal.
Means for demodulating the detected signal.
The detected signal was intended to be displayed on an oscilloscope.
It is preferred that this detected signal strength.
The detected signal is thus altered.
Defects are eliminated by frequency filtering of the detected signal.
The detected signal is then digitized and corrected.
Any misalignment will reduce this detected signal.
This detected signal is filtered and further amplified.
Demodulating the detected signal.
The detected signal must be demultiplexed.
The signal value is defined as a measure of the detected signal.
The detected signal is demodulated.
There is no detected signal.
The detected signal is filtered to select portions characteristic of knock.
See also
The modulations of the detected signal indicate bubble formation.
The detected signal is carried by the leads to the metering instrumentation.
A correlator receives these two signals and generated a detected signal.
Leak detected signal.
This affects the fineness of the resonance peak at the detected signal.
The detected signal is in quadrature with the alternating emission current.
The figure on the left shows the detected signal as a function of time.
The detected signal decreases rapidly with increasing target distance.
Means for filtering the low frequency components of the multiplied detected signal.
Detected signal connections.
The circuit makes a comparison between the detected signal and a set point.
The conventionally detected signal is applied to the luminosity control of a television screen.
Additional observations will be required to confirm the planetary nature of the detected signal.
Detected signal is then indicative of the amount of analyte present in the sample.
The speed of the teeth is inversely proportional to the period of the detected signal.
The pulse width of the detected signal directly corresponds to the voltage detected.
The isothermal amplification can amplify the ultimately detected signal quite significantly.
The detected signal is then converted into an image of the thrombus by the system.
It also contains a bar graph display to indicate the magnitude of the detected signal.
The detected signal is then sent to an audio amplifier and loudspeakers for listening.
The audible noise is introduced into the audio content of the detected signal.
The pulse width of the detected signal determines the voltage of the analog signal.
The method initiates a handoff based on a comparison between a detected signal strength and a threshold.
The thus detected signal is overlaid with the output from the peak detecting circuit.
The receiver detects the transmitted signal and processes the detected signal to obtain desired information.
Probes that generate the detected signal through hybridization are detected during the annealing step.
The form of the response is shown as a plot of detected signal S against time.
The detected signal voltage Vdet can then be delivered to a conventional comparator device.
In this sense, the detected signal may be ambiguous.
The modulated-data signal is detected as a detected signal.
One preset condition is that the detected signal must have reached a predetermined threshold value.
In practice, detection noise is also added to the detected signal.
The detected signal has a frequency at a period of 2w.
Then, the central frequency of each detected signal is estimated.
Then, the detected signal strength is converted to analyte concentration.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Detected
Show more
It can be detected to a high precision whether operations are going on
Enc encoder stopped detected obstacle alarm
All detected zones will be displayed on a list
