Examples of 'interrupt signal' in a sentence
Meaning of "interrupt signal"
interrupt signal - a communication mechanism that stops or temporarily halts a process or flow of data
How to use "interrupt signal" in a sentence
Basic
Advanced
interrupt signal
This signal might initiate an interrupt signal.
Generates an interrupt signal to wake the device back to work.
The acknowledgment allows the device to remove its interrupt signal.
This may be achieved using an interrupt signal or other conventional technique.
This interrupt request is referred to as the qualification interrupt request or first interrupt signal.
Data transfer interrupt signal.
In a possible implementation, the fingerprint signal may be an interrupt signal.
The problem of synchronizing the interrupt signal in a console input stream was considered.
Further, the fingerprint signal is an interrupt signal.
The second timer generates an interrupt signal when it completes the count down.
The interrupt signal causes power to be interrupted to the particular power cell 64.
Make sure that no objects can interrupt signal transmission.
Receiving an interrupt signal from one of the plurality of temperature sensors ;.
The interrupt controller is coupled to convey the interrupt signal to the microprocessor.
The USB provides an interrupt signal for reporting these events to the host.
See also
SPI devices sometimes use another signal line to send an interrupt signal to a host CPU.
When the interrupt signal is received, the indicator illuminates in the display.
In accordance with the invention, the fingerprint signal is interpreted as an interrupt signal.
The signal POR also causes an interrupt signal for the local control system.
The interrupt signal is then transmitted to the program memory control circuit 16 for responsive action.
Generally, prior fault-tolerant systems generate an interrupt signal when an error is detected.
Therefore, each interrupt signal in fact represents a plurality of basic interrupt sources.
Thus, signal lines for the busy signal and the interrupt signal are not required.
Means for receiving an interrupt signal from one of the plurality of temperature sensors ;.
This signal is thus inhibited in the presence of the interrupt signal INTR6.
Receiving a control interrupt signal, the control interrupt signal being associated with a desired time period ;.
If the offset exceeds a specified range, an interrupt signal is sent to the CPU.
For example, one interrupt signal may represent interrupts generated by three or four tape units.
The microprocessor will thereafter await a packet interrupt signal in a step 92.
This interrupt signal is typically, but not always, synchronized with the horizontal sync pulse.
Interrupt logic 56 then generates the attention interrupt signal for application to host processor 12.
The attention interrupt signal is an asynchronous interrupt to host processor 12.
The interrupt circuit 180 is used to detect and latch an externally generated interrupt signal.
This interrupt signal in line 362 continues until timer proceeds to its set time.
This permits the measurement cycle 308 to repeat upon the next occurrence of a first interrupt signal.
When an interrupt signal is received the method of the present invention moves to step 110.
Microprocessor 20-2 is interrupted by an interrupt signal applied to its INT input terminal.
The interrupt signal 300 remains high until the next interrupt request in the next message frame.
It is noted that the SMM interrupt signal is masked during state 306.
A message from the SCK interfaz bus 16 may be identified by an interrupt signal.
The reset pushbutton 36f also produces an interrupt signal which is communicated to the CPU 60.
An interrupt signal is received and in step 110, it is determined to be a NACK signal.
The interrupt generator 22 outputs an interrupt signal vía the dedicated communication line L1 to the MPU 2.
An interrupt signal INT is generated at an output of an AND gate 2670.
The anomaly signal may be an interrupt signal applied to a microcontroller ( 10 ).
The signal transition detector 42 connects to an interrupt signal controller 60.
For reception, an interrupt signal ITR is provided by the driver AU which actuates a bistable B10.
After that, the microprocessor 68 determines whether the interrupt signal 53a should be turned ON ( made active ).
At block 201, an interrupt signal is detected by the fingerprint sensor.
This device sends a first interrupt signal ( via LI2 ) to PCSI.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Interrupt
Show more
We interrupt this program for a special announcement
You will have to interrupt him to do that
We interrupt this program with an important announcement
