Examples of 'diamond wheel' in a sentence
Meaning of "diamond wheel"
Diamond wheel: A diamond wheel is a type of cutting or grinding tool used in various industries, particularly for precision cutting, grinding, or shaping hard materials like metal, stone, or glass
Show more definitions
- A wheel covered with diamond dust and oil for polishing diamonds and other precious stones.
How to use "diamond wheel" in a sentence
Basic
Advanced
diamond wheel
Check the diamond wheel is installed securely.
Always use a makita offset diamond wheel.
Check the diamond wheel before using.
Checking and installing the diamond wheel.
No other sized diamond wheel should be used.
A diamond wheel shall be operated perpendicular.
Installing or removing diamond wheel optional accessory.
The diamond wheel can be replaced by the customer.
Do not touch the diamond wheel after.
A diamond wheel for mounting on this equipment must.
Ai not been near a diamond wheel in years.
A diamond wheel shall be operated perpendicular to the material being cut.
Always check the diamond wheel before starting.
Do not apply water or coolant to the diamond wheel.
Operation with diamond wheel optional accessory.
See also
When cutting masonry use a dry diamond wheel.
Remove the diamond wheel and space rings.
The premarked line and the diamond wheel.
The rotating diamond wheel can cause injury.
How to grind with a diamond wheel.
Mount the diamond wheel carefully onto the spindle.
Remove the worn diamond wheel.
The mounted diamond wheel must be able to rotate freely.
The fritted pellets are then ground on a diamond wheel.
This is the diamond wheel cut.
Factors affecting the hardness of the diamond wheel.
Insert a new diamond wheel assembly into the tool.
It is better cut with a diamond wheel.
The diamond wheel becomes very hot while working.
Be sure to feed water to the diamond wheel during operation.
The diamond wheel must not be in contact with the wall.
Degrease tiles and sand them with a diamond wheel.
Immediately replace a diamond wheel if the core has been severely undercut.
Never use the side surface of the diamond wheel.
Never use the diamond wheel to cut zigzag or curved lines.
Dress by pressing lightly on the outer edge of the diamond wheel.
A worn diamond wheel overloads the motor and reduces working efficiency.
This is clearly indicated by circular sparking of the rotating dry diamond wheel.
Start cutting only when diamond wheel reaches its maximum speed.
The thinning is for example carried out by polishing by means of a diamond wheel.
Rotate the diamond wheel while pressing the shaft lock until it engages.
Align the directions of the arrow on the diamond wheel and the tool.
Check the offset diamond wheel carefully for cracks or damage before operation.
Always keep your hands away from the cut ting area and the diamond wheel.
Use only the recommended diamond wheel with the correct hole size.
Loosen the wheel flange with the twopin spanner and remove the diamond wheel assembly.
The continuous rim diamond wheel provided with this saw is for wet or dry cutting.
Installing or removing diamond wheel Fig.
Offset diamond wheel Dry type.
DO NOT grind or cut metal with a diamond wheel.
You'll also be interested in:
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
Examples of using Diamond
Show more
Everything from diamond heists to stealing boats
Diamond probably locked it from the inside
Installing or removing diamond wheel optional accessory
