Examples of 'diamond wheels' in a sentence
Meaning of "diamond wheels"
Diamond wheels are abrasive wheels or grinding tools that are embedded with synthetic diamonds. These wheels are used for grinding, cutting, or shaping hard materials such as stone, glass, ceramics, carbides, or composites. The industrial-grade diamonds on the wheel's surface provide superior hardness and cutting performance
Show more definitions
- plural of diamond wheel
How to use "diamond wheels" in a sentence
Basic
Advanced
diamond wheels
Protect the diamond wheels from shock.
Diamond wheels on a grinding machine.
Use only undamaged diamond wheels.
The diamond wheels have a diamond grit.
Cutting wheels include diamond wheels and abrasive discs.
The diamond wheels continue to rotate after the.
Continuos rimmed diamond wheels.
Use dry diamond wheels for cutting concrete.
Observe that the rotation direction of the diamond wheels.
The ordinary diamond wheels on the market have.
Sharpening of this type of blade is done only with diamond wheels.
Remove the diamond wheels and space rings.
This power tool is intended to function as a grinder with offset diamond wheels.
Use only specified diamond wheels and cutting wheels.
Adjusting the groove width the distance between the two diamond wheels.
See also
Which require diamond wheels for grinding to the close tolerances.
There is no lateral movement or rotation of the diamond wheels on the drive shaft.
Never use ordinary diamond wheels which may be available on the market.
Before each use inspect the accessory such as offset diamond wheels for chips and cracks.
Damaged diamond wheels can develop cracks and burst during operation.
Remove the blade spacers and diamond wheels from the drive shaft.
Rotate the diamond wheels while pressing the shaft lock until it engages.
Edging is generally done on a machine comprising diamond wheels which perform the above defined machining.
Diamond wheels There are no products in this category.
Use only continuous rimmed diamond wheels suited for masonry materials.
This machine is not intended to be used with Wet Diamond Wheels.
Make sure the diamond wheels are reliably fastened and rotate freely.
Always use Makita offset diamond wheels only.
First keep the diamond wheels without making any contact with a workpiece.
Use only true-running diamond wheels.
Wait until the diamond wheels stop completely and then raise the tool.
Holding the push button as before . ( 9 ) Ensure that the diamond wheels are secure and that.
STIHL also offers diamond wheels for cutting ductile iron and some structural steel.
Use only type “ 1 ” abrasive and diamond wheels.
Tormek now launches three new diamond wheels and a Multi Base for edge tool sharpening.
The diamond wheels are steel centered, and diamond particles are imbedded in their cutting edges.
The Coarse slot offers interlocking diamond wheels that are very aggressive.
Handle diamond wheels carefully and store them according to the manufacturer 's instructions.
Here are some reasons why STIHL diamond wheels are number one in the industry.
The diamond wheels are breaking in, NOT wearing out.
Installing the diamond wheels Fig.
Diamond wheels There are 3 products.
Do not use Type 1 abrasive or diamond wheels without proper guarding.
Diamond wheels - SAR-Machine Oy.
Pingback, diamond wheels.
Some samples and tiles were smoothed using diamond wheels to a depth of about 0.6 mm.
Some other non-STIHL branded diamond wheels are manufactured with abrasive material on their sides.
Do not use Type 1 flat abrasive or diamond wheels without proper Type 1 guard.
Removing the diamond wheels Fig . 5.
You'll also be interested in:
Examples of using Wheels
Show more
Wheels up and outbound for home base
Tell the pilots wheels up in five minutes
Wheels down and looking for my ride
Examples of using Diamond
Show more
Everything from diamond heists to stealing boats
Diamond probably locked it from the inside
Installing or removing diamond wheel optional accessory
