Examples of 'dimensional change' in a sentence
Meaning of "dimensional change"
dimensional change: A transformation involving the modification of the physical dimensions or aspects of an object, structure, or space, often implying a shift in size, scale, or configuration
How to use "dimensional change" in a sentence
Basic
Advanced
dimensional change
Transmutation is more than third dimensional change.
Dimensional change by change in relative humidity length thickness mass.
Each point depicts a dimensional change.
The greatest dimensional change occurs in a direction tangential to the growth rings.
The table also discloses that very low dimensional change can be obtained.
Dimensional change is the greatest when the microfibrous web is totally amorphous.
In embodiments the absolute areal dimensional change is a shrinkage or an expansion.
The dimensional change at different densities is stable for the newly developed material.
This can prevent excessive dimensional change during the life time.
The size and geometry of the tool will also affect distortion and dimensional change.
There was no distortion or dimensional change before and after the layer separation.
This residual recovery force will ensure a safety margin after the desired dimensional change has occurred.
A ferromagnetic material will have a dimensional change when an external magnetic field is applied.
The % dimensional change results are given in the tables below.
Moreover, it can be compressed radially without longitudinal dimensional change.
See also
Additionally the lower dimensional change is an indication that better tolerances will be obtained.
Since the deformation is isochoric, there is an opposite dimensional change in the orthogonal direction.
Use the Dimensional Change Card Sort Task to classify children as either passing or failing.
The higher the equilibrium water content of the material, the greater the dimensional change.
The dimensional change in this case was merely 5 µm.
The physical properties include density, compressive strength, heat distortion temperature, and environmental dimensional change.
Thus, further dimensional change will be kept to a minimum.
The distance is then measured as ( x ) plus dimensional change.
Does not cause dimensional change to the base material ;.
The distance was then measured as ( x ) plus dimensional change.
Therefore, actual dimensional change is less than tabulated.
Said dimensional change usually occurs at a displacement of the ion-exchange material 's boundary.
Irradiation-induced dimensional change.
Consequently, the dimensional change is apt to occur in the connecting pipe portion.
Dimensional change in %.
In special cases, the dimensional change may be close to zero expansion.
Dimensional change ≤ 3 % shrinkage in all directions.
Textiles - Determination of dimensional change of fabrics - Accelerated machine method.
This dimensional change is then converted into signal indicative of the internal force / pressure.
There was no measurable dimensional change for Film Example No. 2.
The Dimensional Change Card Sort Task is a tool designed to evaluate children 's executive function.
Figure 1 shows a bend, a dimensional change and a T-piece.
Further, deforming and dimensional change thereof are slight irrespective of long-term wearing or repeated washings.
The critical dimensional change is listed in Table 3.
EXAMPLE 2 Percentage dimensional change in using Apomul SAK in combination with a silicone component.
The percentage dimensional change ( PDC ) is determined using the following formula, EPMATHMARKEREP where,.
After curing a dimensional change of less than 0.2 % was observed.
The plane-direction dimensional change of the electrolyte membrane was 14 %.
The plane-direction dimensional change of the obtained electrolyte membrane was measured, and was 17 %.
As illustrated, the dimensional change member 82 includes a plurality of apertures 114 formed therein.
Determination of the dimensional change after washing and drying according to ISO 5077 ;.
You'll also be interested in:
Examples of using Dimensional
Show more
To assure accurate dimensional specifications of the washers
Dimensional changes after hardening and tempering
Flanged cage model dimensional specifications in mm inches
Examples of using Change
Show more
Ming will not change his mind
Change duct size gradually to minimize turbulence
You can even change your name to
