Examples of 'dimensional changes' in a sentence
Meaning of "dimensional changes"
Dimensional changes: Refers to alterations or variations in the dimensions or size of an object or structure. This phrase is commonly used in fields such as engineering, physics, and manufacturing
How to use "dimensional changes" in a sentence
Basic
Advanced
dimensional changes
Dimensional changes after hardening and tempering.
Any change of appearance or dimensional changes are recorded.
Dimensional changes can therefore be immediately tracked.
Identifiers should be updated if dimensional changes have occurred.
Dimensional changes during washing and drying.
The difference value between two dimensional changes.
The dimensional changes oscillated around zero.
But studies have shown that dimensional changes.
These dimensional changes are particularly noticeable for infants.
Spread is a result of the different dimensional changes in different directions.
Dimensional changes after heating.
Identifiers should be updated if there have been dimensional changes to fillings.
Tolerances for dimensional changes during washing and drying.
In this method no special action is performed upon dimensional changes.
Dimensional changes none none.
See also
Radiopaque structures tend to cause dimensional changes in cbtc images.
Dimensional changes during hardening and tempering should be added together.
This feature is caused by dimensional changes of the pin during hydrolysis.
Click a transom in the table or in the preview to make dimensional changes.
The dimensional changes have been measured after austenitizing and tempering.
Dilatometry is a method for characterizing dimensional changes of a material as a function of temperature.
These dimensional changes which occur are negligible for other applications.
Further such a member has unacceptable dimensional changes with temperature.
This leads to dimensional changes at machined parts and to other electrical properties.
Exposure of many commercial lenses of this pH can cause undesirable dimensional changes.
Minimum dimensional changes.
It is virtually impossible to have a workpiece undergo carburization without having some dimensional changes.
The dimensional changes after washing and drying shall not exceed.
This behavior is an outcome of the dimensional changes of the pin during the hydrolysis.
The dimensional changes and lateral movements of paper web in newspaper printing.
This is necessary to accommodate the dimensional changes brought about by the swelling process.
Dimensional changes in pipes and between pipes and hoses should be avoided.
This process greatly reduces dimensional changes in the polyester material in all directions.
Dimensional changes of the polymer upon hydantoin formation is a potential problem as well.
This means thus that the risk for dimensional changes is further reduced.
All semis have to be hot worked in order to achieve the required dimensional changes.
I do believe that the dimensional changes to the planet have already began.
Top pin and lower catch bracket positions can be adjusted to compensate for dimensional changes.
Heat treatment is used to limit dimensional changes caused by metallurgical effects at extreme temperatures.
The fixing method must ensure the membrane is secured against dimensional changes and wind uplift.
Dimensional changes and weight loss of the electrodes may be equal throughout the electrode stack.
This behavior is outcome of the dimensional changes of the oriented pin during the hydrolysis.
In this method, no special action is performed on dimensional changes.
This means that the risk for dimensional changes of the absorber material is reduced.
The omega-shape corrugations are well suited to repeated cycles of dimensional changes.
Large dimensional changes indicate that the molding process has failed to achieve the desired structure.
This heat treatment causes significant distortion and dimensional changes to the chuck housing.
These dimensional changes are clearly expensive, because of the extensive new modeling that they require.
Generally speaking, on sintering only small dimensional changes will occur.
The dimensional changes are preferably less than 8 percent and more preferably less than 5 percent.
You'll also be interested in:
Examples of using Dimensional
Show more
To assure accurate dimensional specifications of the washers
Dimensional changes after hardening and tempering
Flanged cage model dimensional specifications in mm inches
Examples of using Changes
Show more
Each press changes the display indication
Because he wanted to make a lot of stupid changes
You can do these changes in three days
