Examples of 'dimensional tolerance' in a sentence
Meaning of "dimensional tolerance"
dimensional tolerance: a term commonly used in engineering and manufacturing to define the acceptable deviation from a specified dimension in a technical drawing or design
How to use "dimensional tolerance" in a sentence
Basic
Advanced
dimensional tolerance
Dimensional tolerance depends on the geometry of the component.
This does not just concern the dimensional tolerance.
Dimensional tolerance are adjusted to customer needs.
Tighter control of dimensional tolerance.
Dimensional tolerance of mekpan panel products.
Finishes and dimensional tolerance.
Dimensional tolerance depends of material and size of the forged part.
Improved dimensional tolerance.
The size table must also be complemented with dimensional tolerance.
Close dimensional tolerance.
The post section can have extremely good dimensional tolerance and finish.
Narrow dimensional tolerance.
The cutting off is useful to guarantee the correct dimensional tolerance to the ring.
In blow molding dimensional tolerance depends heavily on the part size and wall thickness.
In such medicament delivery systems, each subsystem has a dimensional tolerance.
See also
It is great for providing a close dimensional tolerance and low surface finish in volume production.
Dimensional tolerance Ni in this square No.
Water jet cutting operation offer a good dimensional tolerance and a very high edge quality.
Dimensional tolerance analysis and quality assurance of a particle tracker's support structure.
In manufacturing practice, minor fluctuations in dimensional tolerance are overcome by the use of pressure.
Close dimensional tolerance of the beam 10 in the manufacturing process is not required.
The positioner 's ability to handle acceleration will affect the dimensional tolerance.
Specification dimensional tolerance Mechanical properties.
In addition, it is possible to cope with a very small dimensional tolerance of a machined hole.
What is the dimensional tolerance of the housings?
Additionally, the whole part need not be assigned the same dimensional tolerance.
As a rule, a dimensional tolerance of only one millimeter is allowed.
Therefore, the vibratory processed hollow wheel gear could end up being out of dimensional tolerance.
Therefore, a dimensional tolerance between components can be increased.
In the preferred embodiment, using 50 dpi image, the dimensional tolerance is 3 pixels.
Sufficient dimensional tolerance for handing / transferring goods to / from the process chamber.
CAQ ( computer-aided quality ) is used for tasks such as Dimensional tolerance ( engineering ) analysis.
Therefore, no dimensional tolerance is allowed, which complicates manufacture and assembly of the device.
However, this requires strict dimensional tolerance and therefore increases the manufacturing cost.
The dimensional tolerance of the aperture 128 is small.
It is preferred that the dimensional tolerance is accurate to at least ± 0.3 microns, or less.
Dimensional tolerance Generally the DIN ISO 2768m is applied to all products!
You'll also be interested in:
Examples of using Dimensional
Show more
To assure accurate dimensional specifications of the washers
Dimensional changes after hardening and tempering
Flanged cage model dimensional specifications in mm inches
Examples of using Tolerance
Show more
Tolerance and pluralism as indivisible elements in the
Everyone has a unique tolerance to electrical stimulation
Tolerance means a respectful attitude to religious beliefs
