Examples of 'dimensional tolerances' in a sentence
Meaning of "dimensional tolerances"
Dimensional tolerances - the acceptable variations or deviations from specified dimensions, measurements, or standards in manufacturing or engineering processes, ensuring that the final product meets the required specifications
How to use "dimensional tolerances" in a sentence
Basic
Advanced
dimensional tolerances
Quirements to quality and dimensional tolerances are fulfilled.
Dimensional tolerances of mekpan panel products.
They possess in addition good dimensional tolerances.
All forge dimensional tolerances were met.
By this method is possible obtain good dimensional tolerances.
Close dimensional tolerances and high surface qualities as required.
Complex shapes and high dimensional tolerances are possible.
High voltage transformers must be manufactured to very precise dimensional tolerances.
It depends mainly on the dimensional tolerances of the package.
The magnitude of clearance cd could vary with normal dimensional tolerances.
Deviation from dimensional tolerances.
Containers intended for such assemblies necessarily require close dimensional tolerances.
See table of dimensional tolerances.
The ceramic core is manufactured with certain dimensional tolerances.
Consistently tight dimensional tolerances and more intricate detail.
See also
Shell molding process offers better dimensional tolerances.
It maintains dimensional tolerances and does not create burrs or sharp edges.
Ability to read plans and interpret dimensional tolerances.
Standard dimensional tolerances.
Ability to read plans and understand dimensional tolerances.
Improved dimensional tolerances.
All belts moulded to the tightest dimensional tolerances.
Close dimensional tolerances.
This makes it difficult to obtain good dimensional tolerances.
Consistent dimensional tolerances.
Some precision production equipment can achieve even tighter dimensional tolerances.
Reduction of dimensional tolerances.
The assembly is then gauged to ensure it meets the correct dimensional tolerances.
Low dimensional tolerances.
Squaring up with close dimensional tolerances.
In this manner dimensional tolerances in the individual components of the apparatus can be eliminated.
Extremely reduced dimensional tolerances.
The dimensional tolerances are far in most machines than necessary for precise components.
Aluminium extrusions are produced to standard dimensional tolerances unless otherwise specified.
The products are finished by conventional methods such as lapping to obtain desired dimensional tolerances.
It is therefore impossible to meet the dimensional tolerances on the pane of glass.
The required dimensional tolerances of the tubular fuselage element of the airplane are thus guaranteed.
There are partial edge injuries and dimensional tolerances in the material thickness.
Normally the warm compaction process leads to higher strength and better dimensional tolerances.
This guarantees narrow dimensional tolerances and prevents dreaded thermal bridges.
The carpoules are often made from glass and are subjected to relatively large dimensional tolerances.
It thereby compensates any dimensional tolerances of the cavity of the body element.
Such containers may be easily produced in very large numbers and to high dimensional tolerances.
Grinding is usually performed to restore dimensional tolerances and to provide smooth finish.
The dimensional tolerances will be those applicable to the appropriate EURONORMS.
These free plays are also a source of excessive dimensional tolerances in the finished product.
The dimensional tolerances of the pipes ;.
Parts having excellent surface finishing and low dimensional tolerances characterize the investment casting.
This step 17 is preferably performed by lamination so as to obtain very advantageous dimensional tolerances.
The less stringent dimensional tolerances in each member help suppress an increase in cost.
You'll also be interested in:
Examples of using Dimensional
Show more
To assure accurate dimensional specifications of the washers
Dimensional changes after hardening and tempering
Flanged cage model dimensional specifications in mm inches
Examples of using Tolerances
Show more
Values without tolerances are given for guidance
Tolerances allowed percentage of the defective produce
Compensation of mounting tolerances and thermal expansion
