Examples of 'drill spindle' in a sentence
Meaning of "drill spindle"
In machining, a drill spindle is a rotating component that holds the drill bit and provides the necessary torque and speed for drilling operations
How to use "drill spindle" in a sentence
Basic
Advanced
drill spindle
Fasten the drill spindle to the collar.
Tool holding fi xture in the drill spindle.
Fix the drill spindle with an open end spanner.
Set the working speed by turning the drill spindle while.
The drill spindle is locked when the switch is not pressed.
Coolant flows through drill spindle and drill bit.
Drill spindle and the taper shank of the tool are free of dirt and grease.
Place the machine with the drill spindle pointing downwards in a vice or the like.
In case of jamming of a drill bit, the drive to the drill spindle is interrupted.
The drill spindle has a right-hand thread.
A water-driven, manual lathe and a drill spindle may be viewed in an outbuilding.
If necessary, you can aid the switching procedure by turning the drill spindle slightly.
Screw the drill chuck onto the drill spindle and tighten firmly tightening torque.
The locking screw 14 secures the drill chuck against loosening from the drill spindle.
Grip the drill spindle using an open-end spanner.
See also
If the drill becomes caught or jammed, the drive to the drill spindle is interrupted.
Hold the drill spindle tight with an open-ended spanner.
If the drill bit jams or edges, the drive to the drill spindle is interrupted.
Hold the drill spindle securely using an open-end wrench.
The antilash precision ball bearings of the drill spindle facilitate optimal true-run turning.
Hold the drill spindle firmly with an open-ended spanner.
Fitting - Place the angle attachment on the drill spindle.
The locking screw 9 safeguards the drill spindle from loosening in the chuck.
Drill spindle adjustable for angled holes max . 6.
Drill mounting of drill spindle Morse taper MK4.
The drill spindle is locked by pressing the spindle lock button 24.
Slip the double hex coupling ( 1 ) over the hex on the drill spindle.
The drill spindle is locked when the On / Off switch 7 is not pressed.
The keyless chuck 1 is secured with a securing screw 13 against unintentional loosening from the drill spindle.
A work -- Hold drill spindle 1 in place by the spanner flats 6 using a.
Fitting/removing the chuck Fitting - Place the chuck on the drill spindle.
Put the safety device ( 7 ) on the upper part of the drill spindle.
You'll also be interested in:
Examples of using Spindle
Show more
For main spindle drives on machine tools
The valves have an external spindle thread
Spindle probing software functionality comparison chart
Examples of using Drill
Show more
Drill holes as indicated in the illustration below
They are gonna drill into the ground
Hand drill or electric drill properly grounded
