Examples of 'drive pin' in a sentence
Meaning of "drive pin"
drive pin - refers to a cylindrical or tapered pin used to secure or connect two or more components together, typically within a mechanical or structural system
How to use "drive pin" in a sentence
Basic
Advanced
drive pin
Align new propeller with drive pin.
Nk drive pin with matel washer.
The pump includes a drive pin and a drive crank.
Dn drive pin مع angle clip.
Align brush drive slots with brush drive pin.
Nk drive pin مع matel washer.
Disassemble and make sure drive pin moves freely.
A drive pin is attached to the distal end of the extension.
Align the new propeller with the drive pin.
A drive pin attached to the sleeve is positioned through the slots.
The formulation or body is disposed distal to the drive pin.
The first drive pin is slidable within an aperture of said first arm.
Disassemble to clean and lubricate drive pin and ratchet gear.
Check the motor drive pin by unbolting the motor from the gearbox.
A picker shaft can be held in biased mating engagement with a drive pin.
See also
The drive element may comprise a drive pin configured as a roller pin.
The tab prevents disengagement of the picker shaft from the drive pin.
The drive gear includes a drive pin eccentrically mounted on a face of drive gear.
This movement has the slider block sliding relative to the drive pin.
Disassemble to clean and lubricate the drive pin and the ratchet gear.
Make sure the drive pin is installed in the axle before starting the spreader.
Figure 9 is a view of an example drive pin assembly.
Remove the wheel drive pin from the wheel hub and wheel shaft.
The drive shaft stub of the bamix is equipped with a drive pin figure 2.
The picker shaft and drive pin have substantially the same outer diameter.
Figure 5 is a vertical sectional view through a modified drive pin and slider block ;.
Sure the drive pin on the stub fits firmly into the notch of the accessory.
These bistable modules each include a drive pin able to move into two stable positions.
Drive pin broken Check and replace drive pin.
If brushes rotate in both directions, drive pin is jamming the ratchet gear.
If the drive pin falls out, push it back in.
When the drive hex is removed, the drive pin can fall out of the axle.
Optionally, the drive pin has a greater diameter than the skin piercing element.
When installing the wheel, make sure the drive hex is aligned with the drive pin.
To reassemble, insert the drive pin through the hole in the brush shaft.
The output gear 6 carries an eccentrically mounted drive pin 7.
When fitting the chuck, the drive pin must be inserted into the groove.
The drive pin 56 extends in the second direction y.
Figure 35 shows an alternative picker shaft and drive pin mating arrangement.
Furthermore, the drive pin of the spades and their pivot pin are separate and offset.
The shaft drive end 231 can then be moved out of alignment with the drive pin.
Once the drive pin has been sufficiently retracted, the slider reaches the first stop.
Figure 31 shows a drive pin having a key.
If the drive pin is sheared / broken, you will need to hold the shaft.
The shaft 52 is coupled to the outlet of the motor via a drive pin 53.
Replace the drive pin check piston O-ring.
Figures 31-38 show examples of picker shaft and drive pin mating arrangements.
The drive pin is centrally fixed to the moveably shutters / reflectors by a fixing pin 28.
Drive shaft 23 mounts a drive pin 24 at the distal end thereof.
Drive pin 478 is generally in the form of cylindrical structure.
