Examples of 'drive pulse' in a sentence
Meaning of "drive pulse"
drive pulse ~ unclear phrase, it might refer to the heartbeat or intensity of motivation that drives someone to take action. Context would provide a better understanding of its meaning
How to use "drive pulse" in a sentence
Basic
Advanced
drive pulse
The motor drive pulse is thus interrupted.
The detection operation is carried out after each positive drive pulse.
The drive pulse is therefore not interrupted at that moment.
Each of these two parts of the drive pulse lasts for some milliseconds.
Method and device for controlling a stepping motor by interrupting its drive pulse.
The low frequency drive pulse starts immediately after the high frequency measurement has been made.
That period of time is therefore equal to the optimum duration of the drive pulse.
A normal drive pulse P would then cause the motor to rotate backwards.
The coin may move slightly during the low frequency drive pulse.
Of course, the duration of the drive pulse could be set in a different manner.
It then goes high again about two milliseconds after the beginning of each drive pulse.
A starting drive pulse to initiate rotation of the motor in one of said directions ;.
That situation is the one which occurs during the drive pulse interruption periods.
The minimum drive pulse MDP changes when the injector 7 ages.
The circuit can be re-triggered into its original nonconducting state by a drive pulse.
See also
The truncated-waveform drive pulse may be AC or DC.
Short-circuiting the coil a second time until the beginning of the next drive pulse.
A drive pulse is supplied to the pump motor 14b.
However, the current in the coil decreases rapidly after the end of the drive pulse.
An incoming rising edge in the laser drive pulse 158 causes qeneration of a laser flash.
During the drive pulse interrumption periods, the switch 6 is open and the switch 7 is closed.
At instant TA motor 10 receives an in-phase drive pulse I and rotates normally.
The output drive pulse signal 104 goes to a low level when transistor 260 commences conducting.
The signal S13 is used by the control circuit 9 to interrupt the drive pulse I.
For this situation the drive pulse has a duration of 6.8 ms.
The counter 72 counts one in one period of the drive pulse P0 of the motor 6.
Description: a4 simple drive pulse only.
