Examples of 'drive pulley' in a sentence
Meaning of "drive pulley"
drive pulley - refers to a mechanical component used in machinery or vehicles to transmit power or motion. This phrase is often used in engineering, automotive, or industrial contexts
How to use "drive pulley" in a sentence
Basic
Advanced
drive pulley
Retighten the motor drive pulley setscrew.
Place on drive pulley and idle pulley passing it over.
Remove belt from rear drive pulley.
Stepped drive pulley and drive belt.
It is in that case guided by way of a drive pulley.
Tighten the motor drive pulley set screw.
Floor treatment apparatus with solitary drive pulley.
Torque the motor drive pulley set screw.
The drive belt is driven through a drive pulley.
Drive pulley in particular for the distance recorder of a bicycle.
Retighten the engine drive pulley set screw.
Speed sensors or transducers shall not be mounted on a drive pulley.
Visually inspect the engine drive pulley to verify that it is.
Check the interior surface of the engine drive pulley.
Usually installed behind drive pulley an ideally in the discharge chute.
See also
The output shaft rotates the drive pulley.
Drive pulley and tighten pulley are both metal castings.
This construction is not suitable for use as a drive pulley.
Visually inspect the motor drive pulley to verify that it is per.
The drive pulley is also connected to another pulley and gear.
Reinstall the transmission drive pulley with the new belts.
The drive pulley is in rotational communication with the drive assembly.
Motorised drive pulley.
The drive pulley is preferably driven through a pair of bevel gears.
The pulleys may comprise a drive pulley and an idler pulley.
Check the belt guides around the transaxle drive pulley.
The second drive pulley can be attached to the pivot arm.
Place the drive belt carefully over the drive pulley.
Cover over the drive pulley can only be opened with tools.
Use the wrench to pivot the deck drive pulley forward.
The motor and the drive pulley are combined to form a drive module.
This kit includes everything for mounting the drive pulley.
In the shown position drive pulley and drive shaft are drive coupled.
The drive motor is capable of being adapted to drive the drive pulley.
The drive means causes the drive pulley to revolve the belt.
The first drive pulley can be attached to the second rotational drive.
Pivot the wrench forward to move the deck drive pulley forward.
The motor drive pulley is located at one end of the scan axis.
The additional cable is guided by a return pulley and an angle drive pulley.
Be sure the drive pulley is properly aligned onto the keyed motor shaft.
The conveyor may include an idler spaced from the drive pulley.
The belt is hooked between the drive pulley and the driven pulley.
The drive pulley is generally traveling at a greater speed than the belt speed.
Fit the new drive belt on the drive pulley first and then.
Place a straightedge against the outside of the flywheel and the motor drive pulley.
One of the pulleys is a drive pulley while the other pulley is an idler pulley.
The cable from the selector must pass through the drive pulley.
Ensure drive belt is routed in drive pulley groove properly before lowering swing plate.
It indicates that the probe has come out of the groove in the drive pulley.
Route the belt around the drive pulley and under the idler pulley.
You'll also be interested in:
Examples of using Pulley
Show more
Rotate the pulley to be sure it spins freely
Check for a damaged belt or damaged pulley
Pulley and idler not in correct adjustment
Examples of using Drive
Show more
I will drive you wherever you want
Maybe the air gave me the drive
I will drive a car for three years
