Examples of 'end of the nozzle' in a sentence
Meaning of "end of the nozzle"
The phrase 'end of the nozzle' refers to the tip or terminal part of a nozzle, which is typically used to control the flow or direction of a substance, such as liquid or gas. It signifies the final point or extremity from which the substance is discharged or emitted.
How to use "end of the nozzle" in a sentence
Basic
Advanced
end of the nozzle
Cover the end of the nozzle or suction.
It is attached to the end of the nozzle.
Cut the end of the nozzle off where marked.
The aperture and bore receive a cap end of the nozzle.
The shape of the end of the nozzle is bevelled.
The end of the nozzle is in close proximity to the top of the cavity.
Ensure the narrow end of the nozzle is first.
The open side of the pleat was facing the funnel end of the nozzle.
A hole at the end of the nozzle tip is optional.
Cut off the excess wire that extends past the end of the nozzle.
The distal end of the nozzle is provided with a sheet of titanium.
Preferably the actuator portion comprises a ring member arranged at a lower end of the nozzle assembly.
The front end of the nozzle is worn by ground contact during operation.
The angled configuration of the free end of the nozzle 8 is of importance.
At the outer end of the nozzle was provided a diaphragm type pressure transmission device.
See also
Advantageously, the openings are homogeneously distributed at the end of the nozzle.
Desirably the dispensing end of the nozzle is adapted for fitting of a cannula thereto.
Preferably, a chamfer angle is formed at the lower end of the nozzle.
At the outer end of the nozzle is provided a diaphragm type pressure transmission device.
Remove the in-line filter from the other end of the nozzle extension.
The first end of the nozzle assembly is positioned downstream of the fluid inlet.
Place the in-line filter screen into the threaded end of the nozzle extension.
The end of the nozzle is fitted between two parallel rolls which are spaced apart.
Olive, placed at the end of the nozzle to avoid injury.
The end of the nozzle 4 is located in a hole formed in a thick wall.
An inlet portion, located at a first end of the nozzle and comprising an inlet orifice ;.
The front end of the nozzle wears away due to abrasive ground contact during operation.
This gas flows to the end of the nozzle assembly 45.
The end of the nozzle 50 has one or more further openings.
A circular rubber joint 7 is fitted on the end of the nozzle 5.
Consequently, tip end of the nozzle is prevented from being soiled.
As a result, a column of spouting water is formed from the end of the nozzle 51.
Olive, placed at the end of the nozzle to avoid graze risk.
The same is true of the insert members 74 at the opposite end of the nozzle.
Said outlet end of the nozzle is exposed to said outside atmosphere ;.
One of the plates includes a locating ring 30 for locating the injection end of the nozzle 14.
Typically, the end of the nozzle has the cross section of a truncated cone.
FIG . 8 is an isometric view of the discharge end of the nozzle valve.
Point 3 labels the end of the nozzle where the flow transitions from isentropic to Fanno.
FIGURE 2 is an end view of the outlet end of the nozzle shown in FIGURE 1 ;.
The end of the nozzle stops at about 2 mm from the bottom of housing 25.
Remove the nozzle from the end of the nozzle extension Figure 23.
The end of the nozzle head 1 is a plug in form as a screw 5 having a flat end.
Remove the spray tip from the end of the nozzle extension Figure 18.
The upper end of the nozzle 3 is disposed near the internal periphery 5 of the case 1.
A spray nozzle 27 is connected to the free end of the nozzle pipe 25.
At the proximal end of the nozzle is an orifice 36.
A fluid inlet 35 is preferably positioned at the opposite end of the nozzle cover 32.
Only the lower end of the nozzle 24 has been shown in the figures.
The stopper rod seat 24 is the upper end of the nozzle plate 16.
You'll also be interested in:
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
