Examples of 'nozzle' in a sentence
Meaning of "nozzle"
nozzle (noun) - a narrow piece attached to the end of a pipe, hose, or tube to control the direction or flow of a liquid or gas, typically found in devices such as spray bottles or garden hoses
Show more definitions
- A short tube, usually tapering, forming the vent of a hose or pipe.
- A short outlet or inlet pipe projecting from the end or side of a hollow vessel, as a steam-engine cylinder or a steam boiler.
- The nose of an animal; muzzle.
- The part of an earbud that accommodates eartips.
How to use "nozzle" in a sentence
Basic
Advanced
nozzle
Replace nozzle and bring in tight to body.
Attach the textile turbo nozzle to tubes.
Each nozzle can be individually closed or calibrated.
Constantly move the nozzle while cleaning.
Plastic nozzle edges to prevent damage on surfaces.
There is a temperature nozzle right by the sink.
Hose nozzle air suction regulator is open.
Cleaning the steam nozzle cleaning container.
Nozzle to connect drainage pipe to internal tank.
Remove gun nozzle and contact tip.
Nozzle cleaning does not take place properly.
Remove the nozzle from the spout.
Hardened material is removed from the nozzle.
The hot nozzle can cause damage.
The appliance can be used without a nozzle.
See also
Clean the nozzle with a soft brush.
Turn cleaner over to expose bottom of nozzle.
No discharge at nozzle when trigger mechanism is squeezed.
Mounting and use of the nozzle extension.
Degree nozzle creating wide fan pattern.
Check whether the nozzle hole is free.
Main nozzle needle mix adjustment screw.
To remove a suction nozzle simply pull it out.
The nozzle returns to its cleaning container.
Standard cleaning nozzle for most applications.
Dried material on one side of fluid nozzle.
Insert new nozzle and turn clockwise.
Reinstall spray tip into nozzle extension.
The combo nozzle is for narrow surfaces.
Spray lance with high pressure nozzle.
Put on nozzle fitting and burner pipes.
Do not operate the air nozzle unintentionally.
Remove nozzle extension from spray gun.
Bracket for attachment of the fl oor nozzle.
Pull back nozzle to high pressure position.
Spray pattern will be distorted if nozzle is clogged.
Adjust the nozzle to the proper position.
Lock trigger before changing or adjusting nozzle.
Reconnect the nozzle to the spray wand.
Clean the hole and brush of nozzle.
Flush the nozzle backwards with water.
There is supersonic speed at the nozzle outlet.
Be sure the nozzle insulator is fully screwed.
It is now securely connected to the floor nozzle.
Turn the drainage nozzle to the OPENposition.
The nozzle or the nozzle support is blocked.
To bring the steam nozzle up in some menus.
Move nozzle wand from side to side.
Always use the nozzle tip guard.
Insert nozzle of the butane gas container.
