Examples of 'end of the screw' in a sentence
Meaning of "end of the screw"
end of the screw - This phrase refers to the terminal point or extremity of a screw, typically used in mechanical or construction contexts to describe the termination point of a screw
How to use "end of the screw" in a sentence
Basic
Advanced
end of the screw
Preferably the free end of the screw is flat.
The upper end of the screw is connected to a generator through a gearbox.
Put the nut on the end of the screw.
At the end of the screw there is a.
A plurality of blade segments are mounted at the discharge end of the screw.
Run the end of the screw strip on the slotted pas.
The die attachment at the end of the screw is removed.
The end of the screw may be threaded but is preferably smooth.
Carefully remove the washer from the end of the screw.
The distal end of the screw is provided with a push block.
Screens are located between the end of the screw and the die.
The other end of the screw has a free smooth hollow edge.
An automatic shut off valve is mounted at the forward end of the screw.
Insert the top end of the screw strip into the portion.
Take the nut and washer off the other end of the screw.
See also
The clamping end of the screw is received in a slot provided in the jaw.
The coupling arrangement is close to a stop position at the end of the screw travel.
The free end of the screw is open to discharge any excess spheres.
Fit a 8 acorn lock nut to the end of the screw.
The material pressure at the end of the screw and the material throughput were noted.
According to one embodiment, the screw exhibits a stirrer positioned at the end of the screw.
A homogenization section at the end of the screw causes an efficient mixing process.
The end of the screw is rounded and is not self-drilling.
The third mark here comprises a shoulder, notably a shoulder marking the end of the screw thread.
The bottom end of the screw body here protrudes beyond the hole on the underside.
Preferably these motors 9 are arranged in pairs at each end of the screw 2.
The active end of the screw directly sets on the die-holder wall.
Figure 7 is a schematic detail view of the head end of the screw in Figure 1.
Furthermore, the proximal end of the screw includes an inner drive tool engagement portion.
A flexible coupling 30 is connected to the upper end of the screw shaft 12.
A front end of the screw 12 is housed in this bearing.
In a different embodiment, not shown, the end of the screw 17 can be lodged in a housing.
The lower end of the screw 17 is supported by a footstep bearing, not depicted.
The clutch 91 is arranged on the left end of the screw rod 4 in Fig.
The one end of the screw rod 6 is connected to a rotating drive motor 61.
To facilitate this operation, a knob 30 is fixed to the far end of the screw 26.
It is disposed at one end of the screw 6 opposite the screw head 62.
Screw 14b includes tip valve 49 positioned at a downstream end of the screw.
The lower end of the screw is rotatably secured in a fixed position to the wedge 201.
To that end, a knob 127 may be attached to the end of the screw.
Place the end of the screw into the pre-drilled hole, remove your fingers, and.
The device comprises a second connecting part 15 receiving a front end of the screw 12.
First end of the screw ( receiving end ).
A drive source, not shown, is drivably connected to the protruding end of the screw 11.
Second end of the screw ( free end ).
The outer peripheral portion of the inlet side end of the screw rotor ( 30 ) is tapered.
Denotes the end of the screw 3 towards the thread 31.
Each also includes a pump casing 39, which is connected to the end of the screw housing 31.
The other end of the screw 11 is connected to the rotor 4.
FIG . 7 is a perspective view of a distal end of the screw fastener applier of FIG . 5 ;.
