Examples of 'end wrench' in a sentence
Meaning of "end wrench"
end wrench - An 'end wrench' is a type of wrench that has a fixed opening at one or both ends, used to provide a firm grip on an object during turning. It is commonly used in mechanical and automotive work
How to use "end wrench" in a sentence
Basic
Advanced
end wrench
Inch open end wrench or adjustable wrench.
A thin profile adjustable or open end wrench should work.
Open end wrench capable of fast driving a workpiece.
Single end wrench.
Use open end wrench provided to hold angle unit spindle before attempting to loosen chuck.
Closed end wrench.
In this embodiment handtool HT comprises an open end wrench.
Reversible open end wrench having retaining property.
Tighten both bolts with the open end wrench provided.
Open end wrench.
You do not use a pair of pliers where an end wrench is needed.
DO NOT use open end wrench or socket wrench to tighten.
You can usually remove the drain plug with a common end wrench and a bit of muscle.
Will you get your end wrench and try to tighten those bolts?
I used a little cheap screwdriver, small pliers, and a cheap adjustable end wrench.
See also
Go get me an end wrench.
Turn the bushing located underneath the bottom of the hinge using a rA " open end wrench.
Use the attached open end wrench to fix the pedal into.
And try to tighten those bolts? Will you getyour end wrench.
Place a 23 mm open end wrench on the damper seal head.
This is already a fire hazard just sitting here! Go get me an end wrench.
Place another 21 mm open end wrench on the damper seal head.
Mm flexible copper tubing ½ " open end wrench.
Place a 21 mm open end wrench on the wrench flats of the cartridge tube.
Start connection by hand then use a ½ " open end wrench.
Place a 21 mm open end wrench on the wrench flats on the damper cartridge tube.
To remove this uses the same principle and the same 15 millimeter box end wrench.
FIG . 11 shows a cross sectional view of the open end wrench in a next operative position.
Open end wrench 1 - adjustable wrench.
Use the supplied open end wrench ( 1 ) to keep the.
Tighten the spring trolley nut with an adjustable wrench or a 7/16 " open end wrench about a.
Slide 7/16 ” open end wrench in behind spring loaded centrifugal switch as shown.
Tighten the locknut with the 1 ⁄ 2 " open end wrench by turning clockwise.
Use the 14 open end wrench to tighten ( clockwise ) the spindle nut, fastening the tapered shank.
FIG . 4 shows another partial, cross sectional view of the open end wrench of FIG . 1.
Use a 14 open end wrench ( C ) to loosen the draw bar, but not enough to remove it.
When doing this hold the tube at position K11 with an open end wrench SW21.
Use a 4mm Allen wrench and 8mm open end wrench to remove the two bolts Fig . 11.
Loosen Hex Nut with 10mm open end wrench.
You'll also be interested in:
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
