Examples of 'open-end wrench' in a sentence
Meaning of "open-end wrench"
This phrase is used to describe a specific type of tool that is designed for turning nuts and bolts. It typically consists of a handle with a fixed jaw at one end and a movable jaw at the other end. The open-end wrench provides a tight grip on the fasteners and allows for torque to be applied in a confined space
How to use "open-end wrench" in a sentence
Basic
Advanced
open-end wrench
Mm open-end wrench for leveling leg locknuts.
Twist the hexagon with a suitable open-end wrench.
Using an open-end wrench to release the core bit.
Hold the drill spindle securely using an open-end wrench.
Never use an open-end wrench as doing so can damage the adapter.
Hold the proportional valve on the fluid housing using an open-end wrench.
Place suitable open-end wrench on the hexagon of the actuator.
Turn bushing located underneath the bottom of hinge using the open-end wrench.
Use an open-end wrench to remove the washer or dryer leveling legs.
Tighten the nuts on the heater core using the supplied open-end wrench.
With a suitable open-end wrench and rotate the core bit to release it.
Tighten unit only at the wrench flats on the sensor using an open-end wrench.
Hold the device with a open-end wrench on the body and screw into the pipeline.
Screw in mounting parts hand tight and tighten diagonally with appropriate open-end wrench.
Hold the device with an open-end wrench on the body and unscrew off the pipeline.
See also
Unscrew the drill chuck using the hex key and the open-end wrench size 17 mm.
The open-end wrench and combination wrench are just two of many different types of wrenches.
While holding the spindle lock, use the provided open-end wrench to tighten the collet nut.
Use an open-end wrench for the assembly.
Use suitable tool open-end wrench.
Use open-end wrench to unscrew and remove hex-head screws, then pull out torsional bearing.
Hold it with an open-end wrench.
Use a 27 mm AF open-end wrench to tighten the clamping nut on the spindle.
A flare nut wrench works best, but an open-end wrench will suffice.
Use a 1/2 " open-end wrench to loosen the two nuts on the front left elevating bolt.
Position the tines using a 50 mm open-end wrench when installing the process.
Tighten the collet nut securely with the supplied 17 mm open-end wrench V.
Pedal installation requires a 15 mm open-end wrench available in the bike tool case.
The cup brush 10 is screwed directly on spindle 1 by means of an open-end wrench.
Tighten firmly with an open-end wrench ( not included ) to secure the wheels in position.
Grip tool holder with enclosed open-end wrench 17.
Use open-end wrench to tighten securely Fig . 4.
To remove the blade, place the open-end wrench on the flats of the saw arbor.
Unscrew ball valve 3 from filter, whilst restraining with a 24mm open-end wrench.
NeJpfuJ Tip, Use a % " open-end wrench for easier access to tighten connection.
Turn the bushing located underneath the bottom of the hinge using a ¹ ⁄ ₂ " open-end wrench.
Tighten the drill chuck using a hex key and the open-end wrench ( size 17 mm ) tightening torque.
To ease screwing on and off, always use a SW 24 open-end wrench at the drilling spindle.
You'll also be interested in:
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
Examples of using Open-end
Show more
There are no over km penalties in an open-end lease
Mm open-end wrench for leveling leg locknuts
It was founded as an open-end joint stock company
