Examples of 'engine lubricant' in a sentence
Meaning of "engine lubricant"
Engine lubricant: A substance used to reduce friction and wear between moving parts of an engine. It is essential for proper functioning and longevity of the engine
How to use "engine lubricant" in a sentence
Basic
Advanced
engine lubricant
Do not change engine lubricant while it is hot.
Engine lubricant through oil fill hole.
Low ash stationary gas engine lubricant.
Replenish engine lubricant to upper level.
Apparatus and method for adding additives to engine lubricant.
To check the engine lubricant level.
Engine lubricant has a major influence on engine performance and service life.
Check and refill engine lubricant.
Mix the engine lubricant with unleaded gasoline in the.
Internal combustion engine lubricant.
Check engine lubricant and add if necessary prior to starting.
The additive chamber may contain any type of engine lubricant additive.
Engine lubricant has a major influence on engine performance and service i ife.
Accidental contact with hot engine lubricant could result in serious burns.
The fuel used for this model is a mixture of unleaded petrol and approved engine lubricant.
See also
All fluids except fuel and appropriate engine lubricant are filled at the factory.
Check engine lubricant level and fill, if necessary.
Lubricant should be changed while the engine lubricant is still warm, but not hot.
If engine lubricant level is low, it must be filled before unit will start.
Premix unleaded petrol and 2-stroke engine lubricant in a clean container approved for petrol.
Oil Pressure Gauge - Indicates the supply pressure of the engine lubricant.
Check the engine lubricant level, pump lubricant level.
Using funnel provided, add entire bottle of engine lubricant through oil fill hole.
Two-stroke engine lubricant and method of using same.
Fill with lubricant following the instructions in Adding / Checking Engine Lubricant earlier in this manual.
Apply a light coat of engine lubricant to the element, then squeeze it out.
Never use gasoline unless it is properly mixed with 2-cycle engine lubricant.
Apply a light coat of engine lubricant to the foam filter element, then squeeze it out.
High quality 2-cycle engine lubricant.
Check both the engine lubricant level and the fuel tank level ; refill as needed.
Do not overfill . 4-stroke engine lubricant provided.
When selecting an engine lubricant for your vehicle, you should take a few things into account,.
Maybe it 's motor oil, engine lubricant.
To check engine lubricant level, Set engine on a flat surface.
However, the use of these PAG bases in an engine lubricant comes up against a difficulty.
To check engine lubricant level, Set pressure washer on a flat surface.
Use according to claim 1 wherein the engine lubricant is an SAE 0W engine lubricant.
Drain lubricant and refill with correct amount of 20W50 engine lubricant.
For best performance, engine lubricant should be changed after every 25 hours of operation.
Pre-mix unleaded petrol and 2-cycle engine lubricant in a clean 1 gallon container approved for petrol.
HIgH qUALITY 2-CYCLE ENgINE LUbRICANT gASOLINE LUbRICANT.
You'll also be interested in:
Examples of using Lubricant
Show more
Do not add lubricant to motor or brush roll
To lubricate the slides with graphite lubricant
Use a cutting lubricant when drilling metals
Examples of using Engine
Show more
I started the engine and sped off
An engine shall be remapped prior to a test cycle if
Always stop the engine before unclogging
