Examples of 'erbium-doped' in a sentence
Meaning of "erbium-doped"
Erbium-doped refers to the process of adding erbium to a material in order to introduce certain properties or characteristics
How to use "erbium-doped" in a sentence
Basic
Advanced
erbium-doped
Modeling and characterization of erbium-doped fiber amplifiers.
Erbium-doped fiber amplifier is the most common one.
Such amplifiers are typically constituted by erbium-doped fibers.
Erbium-doped fiber amplifiers are significant devices in optical-fiber communication systems.
Erbium can also be used in erbium-doped waveguide amplifiers.
Erbium-doped fibre amplifiers are significant devices in optical-fibre communication systems.
However it could also be constituted by an erbium-doped silica fiber.
Studies on amplification by erbium-doped fibers have been published in the following documents,.
In a preferential formulation said amplifying unit includes at least one erbium-doped optical fibre.
The second stage was the erbium-doped chalcogenide thin film deposition.
The substrate may also be composed from other materials, such as erbium-doped silica.
Atomic layer deposition of erbium-doped thin films for silicon integrated waveguide amplifiers.
Such an amplifying waveguide may advantageously be an optical fiber having an erbium-doped fluorine-containing matrix.
By way of example an erbium-doped active fiber having the following characteristics has been prepared,.
The fiber amplifier can comprise an erbium-doped fiber amplifier.
See also
However, the erbium-doped waveguides were realised using aluminium oxide grown with atomic layer deposition.
Typically the amplifier comprises a succession of erbium-doped optical fiber amplifiers.
Other work on erbium-doped Bragg reflectors and gratings was published in a peer-reviewed journal.
The pumping means advantageously comprise at least one pump for lightly erbium-doped fiber.
A hybrid amplifier can use discrete erbium-doped fiber amplifiers combined with DRA 's.
Erbium-doped optical amplifier.
In particular, the usage of Si nanoparticles is advantageous for erbium-doped amplifying fibers.
Erbium-doped fiber amplifier.
For example, each of these amplifiers comprises an erbium-doped fiber.
Erbium-doped fibre amplifier.
Figure 4 illustrates the gain spectra of an erbium-doped fiber amplifier.
Erbium-doped waveguide amplifier.
Record peak power single-frequency erbium-doped fiber amplifiers.
By a length of erbium-doped fibre 8a which is coupled into the branch line 5 by splices 8b.
A background noise mechanism common to all types of erbium-doped fiber amplifiers ( EDFAs ).
Abstract, Erbium-doped optical fibres are commonly used to realize amplifiers.
Said light source is preferably an erbium-doped fluoride-based optical fiber.
Erbium-doped materials have an emission band at a wavelength of around 1.5 um.
The optical amplifier 28 may be constituted by an erbium-doped optical fiber that is optically pumped.
An erbium-doped fibre 51 that functions as the optical amplifier is controlled by a pump laser 62.
The multiplexer allows injecting the signal and the pump in the erbium-doped fiber 20.
A cerium-doped YAG oxide or erbium-doped fluorides can also be used.
However, the amplifier waveguide could also be constituted, for example, by an erbium-doped silica fiber.
Example I Depositing a film of erbium-doped fluorine-containing glass on a substrate 30 made of silica.
Further, the combined signal can be amplified by an erbium-doped fiber amplifier ( EDFA ).
The amplifiers 24 may comprise erbium-doped fiber amplifiers for amplifying signals within the 1550 nm transmission window.
Modern optical fibre repeaters use a solid-state optical amplifier, usually an Erbium-doped fibre amplifier.
The gain recovery time in an erbium-doped fiber amplifier is greater than 0.1 ms.
The common amplification fiber 8 is an 18 m erbium-doped fiber.
This erbium-doped fiber 20 is used to manufacture an EDFA according to the scheme of FIG . 10.
A second optical isolator 35 is arranged at the output of the erbium-doped fiber 20.
The active medium of the amplifier 13 is constituted by an erbium-doped silica optical fiber 15.
The multiplexed signals are transmitted to a length 25 of erbium-doped fiber and then to an isolator 26.
Like the amplifier shown in FIG . 1, this amplifier includes a section of erbium-doped optical fiber 12.
